What other setting must be enabled for the exclusion to function?
An engineer enabled client exclusion in the WLAN, but still sees a client failing EAP authentication
every few seconds in the log. What other setting must be enabled for the exclusion to function?
What security feature mitigates the issue?
Many users report being disconnected from the WLAN and WCS shows events for broadcast
deauthentication frames. What security feature mitigates the issue?
what three conditions would be added to alert on a specific internal SSID with more than 5 clients at -80db?
When creating a custom rogue classification, what three conditions would be added to alert on a
specific internal SSID with more than 5 clients at -80db? (Choose three.)
What signature details should be adjusted to only trigger the alert on a certain amount of client packets with
The controller is reporting an IDS signature ‘deauth flood’ attack and it has been determined that
the default settings are too sensitive for the environment. What signature details should be
adjusted to only trigger the alert on a certain amount of client packets within a certain period of
time?
What signature should the engineer enable for the WLC to report this issue in the future?
Client adapters on the wireless network are locking up and a packet capture shows many
management frames with no SSID element. What signature should the engineer enable for the
WLC to report this issue in the future?
What Cisco recommended solution would resolve this issue?
An engineer is configuring IDS signatures and sets Bcast deauth to enabled and immediately
begins to see Broadcast deauthentication frame alerts. What Cisco recommended solution would
resolve this issue?
What is the default SYSLOG level in a wireless LAN controller?
What is the default SYSLOG level in a wireless LAN controller?
What will occur when the primary RADIUS fails then recovers?
An engineer has configured passive fallback mode for RADIUS with default timer settings. What
will occur when the primary RADIUS fails then recovers?
What two configuration commands must be included on the AP if the RADIUS server IP is 10.9.4.9?
An engineer is configuring 802.1x authentication on an autonomous AP. What two configuration
commands must be included on the AP if the RADIUS server IP is 10.9.4.9? (Choose two.)
Which two security options are possible?
An engineer is segmenting WLAN traffic by security options after the client has received an IP
address. Which two security options are possible? (Choose two.)