Note: Please refer to the Case Study Certkiller .com Japan. For Certkiller 11 to reach IP address
192.168.1.33 ( Certkiller 12 loopback), what outgoing label will be imposed (used)?

Note: Please refer to the Case Study Certkiller .com Japan. What local label will Certkiller 11
announce to its LDP peer for reaching the 192.168.1.17/32 prefix ( Certkiller 11 own loopback)?

Note: Please refer to the Case Study Certkiller .com Japan. What routing protocol is used between
CE11A and Certkiller 11?

Note: Please refer to the Case Study Certkiller .com Japan. On Certkiller 11, how many prefixes
are learned from Certkiller 12 (192.168.1.33) over the MPBGP session?

Note: Please refer to the Case Study Certkiller .com Japan. What label or labels will be imposed
by Certkiller 11 to reach network 10.1.12.64/28 in the Customer_1 VRP?

Note: Please refer to the Case Study Certkiller .com Tallin Indigo Company has indicated that they
cannot
establish connectivity between Indigo 1 and Indigo2. Testing has validated that there is MPLS
connectivity between the Certkiller routers. Based upon the output of the show commands, what
configuration changes must be made to correct the Indigo connectivity issue?

Note: Please refer to the Case Study Certkiller .com Tallin What import and export route target
would you add to the Cyan_Indigo vrf on Certkiller 12 to enable the overlapping VPN?

Note: Please refer to the Case Study Certkiller .com Tallin Based upon the information that you
can obtain from Certkiller 11 and Certkiller 12, what is the routing protocol used between Certkiller

11 and the Indigo 1 site?

Note: Please refer to the Case Study Certkiller .com Tallin Based upon the information that you
can obtain from Certkiller 12, what type of BGP routing updates will Certkiller 12 send to Certkiller
11?

Refer to the exhibit and the following connectivity requirements. How many different VRFs are
required? Sites CK1 A, CK1 B, CK1 C, and CK1 D require connectivity among them. Sites CK2 A
and CK2 B reqire
connectivity between them. Site CK1 2A requires connectivity to sites CK1 A, CK1 B, CK1 C, CK1
D, and CK1 2B. Site CK1 2B requiresconnectivity to sites CK2 A, CK2 B, and CK1 2A.