What is the maximum number of users?
What is the maximum number of users that triggers the recommendation by Cisco to install a CallManager at a remote site in a Cisco Centralized Call processing deployment model environment?
Drag each task on the left to its appropriate position on the right.
Select the best configuration that requires the fewest number
A CallManager cluster topology of Cisco MCS 7835s (each capable of supporting 2500 calls) is being designed for an IP telephony network.
The design must accomplish the following:
1. support up to 6,5000 phones
2. provide a minimal level of redundancy
3. be cost effective
Select the best configuration that requires the fewest number of CallManagers while still providing acceptable performance.
What will your reply be?
The newly appointed Certkiller trainee technician wants to know which protocol is used to maintain the active session with each configured CallManager, when an IP Phone receives its configuration file with a list of prioritized CallManagers. What will your reply be?
Quality of Service classification at Layer 3 is also referred to as:
Quality of Service classification at Layer 3 is also referred to as:
If the TFTP server for the cluster is not available, you are unable t
If the TFTP server for the cluster is not available, you are unable to __________.
select the most appropriate codec to configure between the Austria region and the other regions.
Four geographic regions have defined for an IP telephony deployment: Southern Germany, Northern Germany, Austria, and, Hungary. Although voice bandwidth within a region is not constrained, voice bandwidth between regions is constrained. When you configure CallManager, select the most appropriate codec to configure between the Austria region and the other regions.
Choose the answer that properly completes the command list.
Exhibit
An H.323 gateway is being configured to support CallManager redundancy. Dial-peer 102 should point to the connection to the primary CallManager. There are two commands missing, represented by a set of questions marks (???????). Each answer below has two parts. The first part would replace the first question marks, and the second part would replace the second questions marks. Choose the answer that properly completes the command list.