An engineer installed a 1252 AP and is getting power from the switch. However, devices
connected to the wireless network cannot get 802.11n data rates. What supported switchport
protocol or standard could be the reason for this?

An engineer is performing a site survey for a 5 GHz mesh wireless network. The customer
requires 300 Mbps data rates per radio, 2×3 MIMO technology, and legacy beamforming. What
Cisco access point should be recommended?

While performing an active mesh survey with a Cisco 1550 Access Point, the status LED turns
solid red. What does this indicate?

An engineer is conducting a survey for a point-to-point link with a 30 dBm transmitter and 6 dBi
antenna over 2.4 GHz. If the engineer reduces the transmitter power to 28 dBm, what is the
maximum antenna gain that can be used?

Refer to the exhibit.

A company requires a multi-point bridge solution with Cisco 1400 series bridges.
The central bridge (B1) is set to 10 dBm, the manufacturing remote bridge (B2) is set to
20 dBm, the inventory remote bridge (B3) is set to 20 dBm, and the shop remote bridge (B4) is set
to 10 dBm. What is the maximum allowed power setting for all four bridges?