Your customer has asked you to come in and verify the operation of routers R1 and R2 which are configured to use HSRP. They have questions about how these
two devices will perform in the event of a device failure.

What issue is causing Router R1 and R2 to both be displayed as the HSRP active router for group 2?

Your customer has asked you to come in and verify the operation of routers R1 and R2 which are configured to use HSRP. They have questions about how these
two devices will perform in the event of a device failure.

Refer to the exhibit. If router R1 interface Etherne0/0 goes down and recovers, which of the statement regarding HSRP priority is true?

Your customer has asked you to come in and verify the operation of routers R1 and R2 which are configured to use HSRP. They have questions about how these
two devices will perform in the event of a device failure.

What percentage of the outgoing traffic from the 172.16.10.0/24 subnet is being forwarded through R1?

Ferris Plastics, Inc. is a medium sized company, with an enterprise network (access, distribution and core switches) that provides LAN connectivity from user PCs
to corporate servers. The distribution switches are configured to use HSRP to provide a high availability solution.
· DSW1 -primary device for VLAN 101 VLAN 102 and VLAN 105
· DW2 – primary device for VLAN 103 and VLAN 104
· A failureof GigabitEthemet1/0/1 on primary device should cause the primary device to release its status as the primary device, unless GigabitEthernet1/0/1 on
backup device has also failed.
Troubleshooting has identified several issues. Currently all interfaces are up. Using the running configurations and show commands, you have been asked to
investigate and respond to the following question.

If GigabitEthemet1/0/1 on DSW2 is shutdown, what will be the resulting priority value of the VLAN 105 HSRP group on router DSW2?

Ferris Plastics, Inc. is a medium sized company, with an enterprise network (access, distribution and core switches) that provides LAN connectivity from user PCs
to corporate servers. The distribution switches are configured to use HSRP to provide a high availability solution.
· DSW1 primary device for VLAN 101 VLAN 102 and VLAN 105
· DSW2 primary device for VLAN 103 and VLAN 104
· A failure of GigabitEthemet1/0/1 on primary device should cause the primary device to release its status as the primary device, unless GigabitEthernet1/0/1 on
backup device has also failed.
Troubleshooting has identified several issues. Currently all interfaces are up. Using the running configurations and show commands, you have been asked to
investigate and respond to the following question.

What is the priority value of the VLAN 105 HSRP group on DSW2?

Ferris Plastics, Inc. is a medium sized company, with an enterprise network (access, distribution and core switches) that provides LAN connectivity from user PCs
to corporate servers. The distribution switches are configured to use HSRP to provide a high availability solution.

· DSW1 primary device for VLAN 101 VLAN 102 and VLAN 105
· DSW2 primary device for VLAN 103 and VLAN 104

/
· A failure of GigabitEthemet1/0/1 on primary device should cause the primary device to release its status as the primary device, unless GigabitEthernet1/0/1 on
backup device has also failed.
Troubleshooting has identified several issues. Currently all interfaces are up. Using the running configurations and show commands, you have been asked to
investigate and respond to the following question.

During routine maintenance, it became necessary to shut down the GigabitEthernet1/0/1 interface on DSW1 and DSW2. All other interfaces were up. During this
time, DSW1 became the active router for the VLAN 104HSRP group. As related to the VLAN 104HSRP group, what can to be done to make the group function
properly?

Ferris Plastics, Inc. is a medium sized company, with an enterprise network (access, distribution and core switches) that provides LAN connectivity from user PCs
to corporate servers. The distribution switches are configured to use HSRP to provide a high availability solution.
· DSW1 primary device for VLAN 101 VLAN 102 and VLAN 105
· DSW2 primary device for VLAN 103 and VLAN 104
· A failure of GigabitEthemet1/0/1 on primary device should cause the primary device to release its status as the primary device, unless GigabitEthernet1/0/1 on
backup device has also failed.
Troubleshooting has identified several issues. Currently all interfaces are up. Using the running configurations and show commands, you have been asked to
investigate and respond to the following question.

All interfaces are active. DSW2 has not become the active device for the VLAN 103 HSRP group. As related to the VLAN 103 HSRP group, what can be done to
make the group function properly?

Ferris Plastics, Inc. is a medium sized company, with an enterprise network (access, distribution and core switches) that provides LAN connectivity from user PCs
to corporate servers. The distribution switches are configured to use HSRP to provide a high availability solution.
· DSW1 primary device for VLAN 101 VLAN 102 and VLAN 105
· DSW2 primary device for VLAN 103 and VLAN 104
· A failure of GigabitEthemet1/0/1 on primary device should cause the primary device to release its status as the primary device, unless GigabitEthernet1/0/1 on
backup device has also failed.
Troubleshooting has identified several issues. Currently all interfaces are up. Using the running configurations and show commands, you have been asked to
investigate and respond to the following question.

During routine maintenance, it became necessary to shut down the GigabitEthernet1/0/1 interface on DSW1. All other interfaces were up. During this time, DSW1
remained the active device for the VLAN 102 HSRP group. You have determined that there is an issue with the decrement value in the track command for the
VLAN 102 HSRP group. What needs to be done to make the group function properly?

Ferris Plastics, Inc. is a medium sized company, with an enterprise network (access, distribution and core switches) that provides LAN connectivity from user PCs
to corporate servers. The distribution switches are configured to use HSRP to provide a high availability solution.
· DSW1 primary device for VLAN 101 VLAN 102 and VLAN 105
· DSW2 primary device for VLAN 103 and VLAN 104
· A failure of GigabitEthemet1/0/1 on primary device should cause the primary device to release its status as the primary device, unless GigabitEthernet1/0/1 on
backup device has also failed.

Troubleshooting has identified several issues. Currently all interfaces are up. Using the running configurations and show commands, you have been asked to
investigate and respond to the following question.

During routine maintenance, GigabitEthernet1/0/1 on DSW1 was shut down. All other interfaces were up. DSW2 became the active HSRP device for VLAN 101 as
desired. However, after GigabitEthemet1/0/1 on DSW1 was reactivated, DSW1 did not become the active router for VLAN 101 as desired. What needs to be done
to make the group for VLAN 101 function properly?

Refer to the exhibit.

Which option describes the reason for this message in a GLBP configuration?