Which selection is a reason why IGMP snooping should be configured on a switched network?

Refer to the exhibit.

NAT has been configured on the router ‘GW’ and the IP addresses of router ‘GW’ have
been configured properly. Users of PC1 and PC2 are able to ping the IP address
198.51.100.1 but are unable to reach any other IP addresses on the Internet. The ISP
confirmed that their configuration is correct.

Which option would likely correct the problem?

Given the CIA triad elements, which ensures first that the data is encrypted and secure, second that the data is trustworthy, and third that the data is accessible by those who need it?

What is the reason that ProfiNET frames are discarded by default on Catalyst switches?

Your supervisor calls you and tells you that one of the Stratix 5700 switches is not
assigning all CIP explicit messages to the proper QoS queue. The switch was deployed
with the ab-global macro and CIP explicit messages were previously being assigned to the
proper QoS queue.
You suspect the access-lists associated with the ab-global macro have
been changed. Look at the following access list from the switch configuration:
access-list 101 permit udp any eq 2222 any dscp 55
access-list 102 permit udp any eq 2222 any dscp 47
access-list 103 permit udp any eq 2222 any dscp 43
access-list 104 permit udp any eq 2222 any
access-list 105 permit udp any eq 44818 any
access-list 105 permit tcp any eq 44816 any

What needs to be done to fix the above access list?

Which statement is correct regarding Media Redundancy Protocol (MRP) in a ring of ProfiNET devices?

Your controller has a high performance EtherNet/IP interface with port speed of >30,000
packets per second and 80% spare capacity. A new PowerFlex 753 drive will be added to
the system with an RPI of 2ms and has been connected to a switch; you have been asked
to set up the switch port. You open the EDS file and see that the drive will support 16 CIP connections and has transmit and receive capacity of 1,000 control packets per second.

What do you set as the storm control pps threshold limit for the port?

Refer to the exhibit.

What issue does this topology present for the represented traffic flow?

Which two are possible solutions to control which devices can communicate between industrial zones? (Choose two)

Which in-depth approach is used when deploying defense in an industrial zone?