which of the following should always be used to verify that the issue is resolved so that repeat repairs and u
After completing the repair, which of the following should always be used to verify that the
issue is resolved so that repeat repairs and unnecessary part usage will be reduced?
Which of the following questions would help you further evaluate this WI-FI issue?
Janine explains that WI-FI connectivity from her MacBook Pro is intermittent when she is at
home. Which of the following questions would help you further evaluate this WI-FI issue?
Select two.
which of the following are required?
When applying thermal grease during a repair of the Mac Pro (Late 2013), which of the
following are required?
What is most likely the cause of these symptoms?
You are troubleshooting an iMac (Late 2013) that does not power on. You notice that all
diagnostic LEDs remain off when a known-good power cord is connected to the iMac and to
a known-good power outlet. What is most likely the cause of these symptoms?
which of the following troubleshooting stages?
A physical assessment of the Mac should be performed in which of the following
troubleshooting stages?
Which of the following tools should be run after using the Trackpad Keyboard Mapper tool to verify that a keyb
Which of the following tools should be run after using the Trackpad Keyboard Mapper tool to
verify that a keyboard language has been programmed on a MacBook Air (Early 2014)?
What else should you verify to ensure that the ESD-compliant work area is properly configured?
When configuring an ESD-compliant work area and using an ESD wrist strap, ensure that
the metal section or hooks on the strap interior are touching your skin. What else should you
verify to ensure that the ESD-compliant work area is properly configured?
What is the size of the two additional screws?
To remove the bottom case of the MacBook Air (11-inch, Mid 2013), you must unscrew
eight 2.48 mm screws and two additional screws. What is the size of the two additional
screws?
Which of the following should you use first to isolate as either a backlight issue or a video signal issue?
Francine states that she does not see anything on her iMac display when she turns it on.
Which of the following should you use first to isolate as either a backlight issue or a video
signal issue?
Which of the following features of Power Nap will only occur if the portable Mac is plugged into a power adapt
Which of the following features of Power Nap will only occur if the portable Mac is plugged
into a power adapter?