View the exhibits.
Exhibit 1
The frame has these characteristics:
VLANID = 3
802.1p = 3
DSCP=32
Source IP address = 10.1.1.5
Click here for Exhibit 2
The frame shown in Exhibit 1 arrives on an HP 5800 switch’s GigabitEthernet port 1/0/1. QoS maps are at their
default settings. Based on the configuration shown in Exhibit 2, to which queue is the outbound packet
assigned?
A.
2
B.
3
C.
4
D.
5
Explanation:
How this traffic gets marked?
– The policy is applied to the interface Gi 1/0/1 with inbound direction, which means that the trafficthat comes
into the port gets the policy applied.
– As the frame matches the ACL subnet, it will remark the value of DSCP to 40
– Looking at the default table parameters, the traffic gets into the queue 5
(The outbound packet in this case refers to the same packet being placed to go out of the interface, after the
values have been applied)
Incorrect Answers:
Queue Value:
A-> 2 corresponds to DSCP 0 to 7
B-> 3 corresponds to DSCP 24 to 31
C-> 4 corresponds to DSCP 32 to 39
I agree with the answer. D
0
0