View the exhibit.

The exhibit shows a network with HP 5400 zl and 8200 zl switches throughout the core and edge. What isone
advantage of implementing routing on edge switches?

How can a high density of ports and high throughputat the core of an HP FlexNetwork save customers
money?

Which switch is best suited to act at the edge of amedium to large HP FlexFabric solution?

What is the role of neighbor solicitation (NS) messages in the autoconfiguration of an IPv6 address?

A customer requires an HP FlexCampus solution with a core that scales to 40/100G. Which HP switch fabric
meets this need?

A network includes a mix of IGMPv2 and IGMPv3 endpoints and must support the following source specific
multicasting applications:
Source: 10.1.4.2 and Group: 232.0.5.5
Source: 10.1.4.12 and Group 232.0.6.6
The network is already implementing PIM-SM and IGMPv3. In order to support these applications, the HP
10500 switches that act as routers for the endpoints in question must support another feature. Which step
must the network administrator perform on each of these switches?

A company has a service level agreement (SLA) with its service provider. The SLA specifies a 2 Mbps
committed information rate (CIR) and 20 KB committed burst size (CBS). Lately, during peak usage times, the
company has been experiencing brief periods of poorperformance on its external connection (GigabitEthernet
port 2/0/1 on an HP 5800 switch). How can the network administrator configure the Comware switch to address
this problem?

View the exhibit.

A network administrator wants to configure an HP 5800 switch to place all incoming traffic on the
GigabitEthernet 1/0/1 port in priority queue 3. However, one exception applies. All traffic incoming on that port
that is destined to UDP port 55555 should be forwarded in priority queue 4 and marked with DSCP 32. Based
on the current configurations shown in the exhibit,which further steps must the network administratorperform?
(Select two.)

View the exhibits.
Exhibit 1
The frame has these characteristics:
VLANID = 3
802.1p = 3
DSCP=32
Source IP address = 10.1.1.5
Click here for Exhibit 2

The frame shown in Exhibit 1 arrives on an HP 5800 switch’s GigabitEthernet port 1/0/1. QoS maps are at their
default settings. Based on the configuration shown in Exhibit 2, to which queue is the outbound packet
assigned?

A company has a network that includes HP 5800 and 12500 switches. Usage demands on the company’s FTP
servers have increased, causing performance issues during peak usage times. While analyzing link utilization,
the network administrator noticed that the most heavily utilized links experience bursts of congestion, causing
them to drop traffic. The links then experience brief periods of low utilization followed by another burst of
congestion. This pattern continues periodically throughout the peak utilization time. What should the network
administrator do to attempt to create a more efficient traffic pattern on these links?