A company needs a simple authenticate solution for guests. The HP Comware access layer switches will
implement portal authentication (or Web-Auth). The network administrator wants the switch to host the login
web page on an IP address that not used for any other purpose.
What should the administrator do to accomplish this goal?

Refer to the exhibit.

These three routers are currently configured for BGP. They do not apply any routing policy in terms of BGP on
routes or attributes advertised to an received from peers. How can the network administrator for Router 1 cause
Router 1 to advertise 192.0.2.0/24 to Router 2 and Router 3?

Refer to the exhibit.

An HP Comware Switch connects to Voice over (VoIP) phones. The phones connect to user’s computes, so
each switch port connects a computer and a phone.
These are the specifications:
The VLAN for data traffic is VLAN3
The VLAN for traffic VoIP is VLAN11
The phones support Link Layer Discovery Protocol (LLDP) Media Endpoint Detection (MED).The network administrator wants to use LLDP-MED to advertise the voice VLAN ID and priority settings to the
phones. The phones will then send tagged traffic in that VLAN. The switch should not check the incoming
traffic’s MAC address against its voice OID list. The exhibit shows the applicable switch port configuration.
Which additional step must the administrator complete to accomplish this?

A company uses 802.1X authentication to force users to authenticate to connect to the network. The company
uses HP IMC User Access manager (UAM) as the RADIUS server. The company wants to assign users to
VLANs based on their identity. For example, contractor should be assigned in VLAN 20. Assume that VLANs
are extended correctly across the network infrastructure.
Where does a network administrator configure the VLAN policy?

How does virtual output queuing (VoQ) help switches avoid head-of-line blocking and enhance throughput?

A company uses 802.1X authentication to force users to connect to the network. The company uses access
layer switches to enforce the 802.1X authentication and HP IMC User Access manager (UAM) as the RADIUS
server.
The customer requires switches to apply a specific settings to contractor use connections. The network
administrator checks the switch documentation and determines that this settings uses a vendor-specific
attribute (VSA). The administrator check UAN and verifies that it has this VSA defined on it.
How does administrator configure UAM to apply the correct setting?

Refer to the exhibit.

A user connects a device to GigabitEthernet 1/0/1 on switch. The device does not have an 802.1X supplicant.
One minute passes. How does the switch port handle the client?

A network administrator wants to configure Open Shortest Path (OSPF) MD5 authentication on VLAN 100 on
an HP ProVision switch. The administrator has created a global MD5 key chain with an ID and key string that
matches the neighbor’s. which additional step must the administrator complete to accomplish this?

Refer to the exhibit.

Switch 1 and switch 2 run open Shortest Path First (OSPF) on all VLANs. Both switches establish an OSPF
adjacency to a router at the main data center. Exhibit shows shoes some virtual Routing Redundancy Protocol
(VRRP) and OSPF settings on Switch 1 during normal operation.
How can a network administrator increase the resiliency of this solution?

Refer to the exhibit.

A company wants to implement a portal authentication solution for guests (such a solution is also called WebAuth). Guest belong to VLAN4, as shown in the exhibit. The intelligent Management Center (IMC) User Access
Manager (UAM) will provide authentication and the Web Portal.
Where should the network administrator enable portal authentication?