A company has configured two switches as an HP Intelligent Resilient Framework (IRF) virtual device. The IRF
port on each switch is bound to multiple physical links. How does the switch select the link for transmitting
packets on that IRF port?

A company plans to use Intelligent Management Center (IMC) Network Traffic Analyzer (NTA) to monitor
network utilization. How do HP switches with the solution?

Refer to the exhibit.
Exhibit 1

Exhibit 2

Exhibit 1 shows a simplified network topology. All infrastructure devices shown in the exhibit are successfully
implementing (OSPF) on the interfaces. The exhibit also shows settings for OSPF areas. Exhibit 2 shows
additional settings on IRF. The master within IRF 1 fails. Connectivity is disrupted for about one minute.
What can the network administrator do to prevent this issue occurring again?

Refer to the exhibit.

The five routers shown in the exhibit are successfully implementing OSPF on the interface shown in the exhibit.
The exhibit also shows settings for OSPF areas and interface costs.
A network administrator enters these commands on Router 4 and Router 5:

How can the administrator ensures that Router 2 learns the route to 172.16.0.0/16 with next hop 10.0.0.6?

An HP Provision switch port is implementing MAC Authentication (MAC-Auth) to a RADIUS server. A device
connects to the port, and the switch submits a RADIUS Access-Request to the server. What correctly describes
how the switch determines the username and password for the request?

A company needs a simple guest access solution. On each HP Provision access layer switch, the network
administrator (Web-Auth) to an external Web server. Which guidelines must the administrator follow while
setting up the Web server?

What distinguishes an HP switch with a CLOS fabric from an HP switch with a crossbar fabric?

HP Comware Switch 1 connects to switch 2 on GigabitEthernet 1/0/1. Switch 2 implements an inbound rate
limit of 600 Mbps. The network administrator wants switch 1 to buffer traffic that exceeds the Switch 2 rate limit
of 600 Mbps and send the traffic at 600 Mbps. All traffic has the same 802.1p priority and is forwarded in priority
queue 2.
What should the administrator apply to the Switch 1 interface GigabitEthernet 1/0/1?

Two HP 10500 Series Switches connect on a 10G fiber link. One of the two fibers in the link breaks, and a
broadcast storm occurs. How could a network administrator prevent a problem like this from happening again?

Refer to the exhibit.

A network administrator up a remote mirroring on the HP Comware switches in the exhibit. The administrator
must define several port while entering mirroring-group commands on these switches. Which port should be the
reflector port (sometimes called monitor-egress port)?