Which two modes support using SnapMirror over multiple network paths?

A.
Standalone

B.
Partner

C.
Multi

D.
Failover

E.
Give back

Explanation:
https://library.netapp.com/ecmdocs/ECMP1196991/html/GUID-75BD4540-A103-4E2B-8B0AE6BBC0D3F43F.html
http://backdrift.org/man/netapp/man5/na_snapmirror.conf.5.html
Two multipath methods are supported:
The multiplexing mode causes snapmirror to use both paths at the same time. If one should fail, it
will switchto use the remaining path only and use both again should the failing path be repaired.
Failover mode causes snapmirror to use the first path as the desired path and only use the second
pathshould problems arise with the first path.