A Customer wishes to introduce application-level protocols that will provide secure communication
between a client and server by allowing mutual authentication. Which protocol would they use?

The Customer uses ControlCenter SAN Manager to manage their fabric. Some of the SAN
administrators prefer to use switch native tools such as command line to do zoning. You have
been asked to make zoning changes to the SAN. What will you do?

Previously the customer had two 8530s connected for SRDF/S via two DS8B2 with L2 ports.
Buffer credits were set to 50. The line speed was 1Gb/s and the distance was 100km. The
customer recently migrated from the 8530s to two DMX frames. The long distance configuration
remains the same (same switches and link speed). As a consequence of the migration, block size
changed from 2K to 1K. The same amount of data is being transmitted over the link. Given the
changes in the environment, what actions need to be taken?

Which iSCSI discovery method requires the target’s IP address, TCP port, and iSCSI target
name?

A customer has merged four DS-32M2s to form a full mesh fabric which includes 20 dual-pathed
hosts and eight storage ports. Two ISLs are configured between each switch. The ISLs are
currently 80% utilized. The customer will be adding 10 dual-pathed Windows 2k3 Servers in the
next two weeks. What is recommended to prevent performance problems on the SAN?

Refer to the Exhibit.

You have been tasked to monitor the DS-32B2 switch. You have
produced the WLA graph. What is the maximum amount of additional throughput that can be
added to this switch if all ports are operating at 2Gb/s?

A customer wants to implement port security on the Connectrix MDS switches. What is necessary
to implement this?

Refer to the Exhibit.

What would the fabric display in the diagram look like using Connectrix
Manager?

Your customer wants to utilize Jumbo Frames in their new multi-protocol SAN, but is dissatisfied
with the lack of overall improvement after implementation. You want to ensure MTUs larger than
the Ethernet standard of 1500 bytes will be beneficial. Which three [3] conditions must be met?

There are five FA ports allocated to a new SAN. Each server added to the SAN is estimated at
approximately 1000 IOPS. Average I/O size is 8KB/s. Each FA port can support 5000 IOPS. The
write ratio is low. The customer does not want to exceed 80% utilization of the FA ports. How
many servers can be supported based on the allocated SAN resources?