What is the reason for this?
Five AIX hosts were successfully installed to boot from SAN on a DMX1000. When attempting to
boot from SAN the hosts fail. When prompted to select a device to boot from, the customer can
only see the internal device. What is the reason for this?
How would you resolve this?
A customer has implemented a secure fabric on a B-series SAN. They can no longer telnet to the
switch. How would you resolve this?
Which software would you apply to prevent unauthorized access?
A customer has an application that requires high levels of security. They have two dedicated ports
assigned on the Symmetrix. They have two host connections into a single M-series switch. Which
software would you apply to prevent unauthorized access?
What is the problem?
You are merging MDS, B-series and M-series switches. The M=series switch merged with the Bseries switch. The B-series switch merged with the MDS switch. The MDS switch would not merge with the M-series switch. What is the problem?
What are the steps to migrate the fabrics without recreating the zones?
Your customer has two SAN islands built with two ED64Ms in each fabric. Due to the end of the
lease these are being replaced with ED-12000Bs. What are the steps to migrate the fabrics
without recreating the zones?
Which ControlCenter Storage Provisioning Services steps will reduce the time it takes to provision storage to
The customer has 500 identical servers that need to be allocated the same amount of storage
space and storage protection. This task is estimated to take 100 man hours. Which ControlCenter
Storage Provisioning Services steps will reduce the time it takes to provision storage to 10 man
hours?
What PID format is the switch using?
What is the problem?
What do you do to fix the problem?
Your customer has a performance issue on their IP network. You find that write I/O’s are making
multiple round trips between the host initiator and target array. What do you do to fix the problem?
What is the problem?
A customer is trying to connect a HPUX System to a DS-24M2 switch using a FC-AL HBA. The
HBA will not flogi into the switch. What is the problem?