What can a technician do to ensure that no malicious code can be introduced into any of the servers through ph
What can a technician do to ensure that no malicious code can be introduced into any of the servers through physical access? A. Set USB 3.0 to disabled B. Set Secure Boot Policy to enabled C. Set User Accessible Ports to disabled D. Set UEFI Variable Acces to disabled
A technician creates two virtual disks and assigns a dedicated hot spare to each virtual disk. They also creat
A technician creates two virtual disks and assigns a dedicated hot spare to each virtual disk. They also create a global hot spare. A drive fails on the second virtual disk. What is the result? A. Dedicated hot spare for the virtual disk replaces the failed drive. B. Global hot spare replaces the failed drive. […]
A technician needs to replace a server component with orange tabs/releases. Which set of paired steps should t
A technician needs to replace a server component with orange tabs/releases. Which set of paired steps should the technician take to complete this task? A. Power off the server Apply anti-static procedures B. Remove power cables Cold swap the component C. Cold swap the component Apply anti-static procedures D. Hot swap the component Apply anti-static […]
A technician needs to install the OS on a server remotely using iDRAC. What is the minimum iDRAC license requi
A technician needs to install the OS on a server remotely using iDRAC. What is the minimum iDRAC license required to perform this task? A. Express B. Enterprise C. Basic D. Baseboard Management Controller Reference https://community.spiceworks.com/topic/514389-dell-idrac-licensing
A company is using an SC4020 array and the storage administrator wants to expand the available capacity by add
A company is using an SC4020 array and the storage administrator wants to expand the available capacity by adding 92, 3.5” disk drives. Which expansion enclosure(s) can be used to meet the demand? A. 1x SC280 drive bay B. 2x SC180 drive bays C. 4x SC220 drive bays D. 8x SC200 drive bays Reference: https://parera.se/wp-content/uploads/2017/05/DellStorage_SC4020_Spec_Sheet_030714.pdf
A customer is concerned they are over utilizing their 7K drives. Where can information about the real time I/O
A customer is concerned they are over utilizing their 7K drives. Where can information about the real time I/O usage of individual drives be viewed? A. Hardware > Disks > [disk folder] > [disk number] B. Charting > Disks > [disk folder] IO Charts C. Charting > Disks > [disk folder] > [disk number] D. […]
What is the possible reason for this behavior?
A customer is facing poor performance on all synchronously replicated volumes every Thursday between 4 PM and 6 PM. All departments have checked their applications for any batch jobs; however, nothing was found. The I/O graphs do not show any anomaly and the replication links are not saturated. What is the possible reason for this […]
Assume a storage administrator is using the recommended storage profile. What describes the distribution of vo
Assume a storage administrator is using the recommended storage profile. What describes the distribution of volume data residing in an SC series storage array that has 15K and 7K as the back-end? A. New and frequently accessed replay data in Tier 1 RAID 5 Aged replay data and inaccessible data in Tier 3 RAID 6 […]
What is the correct system hierarchy of SC Series array storage virtualization?
What is the correct system hierarchy of SC Series array storage virtualization? Answer: Explanation:
Which best practices should be followed when using iSCSI to connect SC Series arrays and hosts for switches th
Which best practices should be followed when using iSCSI to connect SC Series arrays and hosts for switches that incorrectly negotiate speed and duplex? A. Use a separate supernet or switches for iSCSI traffic Gigabit full duplex hard set for all iSCSI ports Ensure switches used for iSCSI are of a blocking design B. Use […]