Refer to the exhibit. Which two statements about the SNMP configuration are true? (Choose two.)
A.
The router’s IP address is 192.168.1.1.
B.
The SNMP server’s IP address is 192.168.1.1.
C.
Only the local SNMP engine is configured.
D.
Both the local and remote SNMP engines are configured.
E.
The router is connected to the SNMP server via port 162.
Hi
Local SNMP Engine is configured? to me it is just default value.
I think this is A, E.
What do you think?
0
0
Examples
The following example specifies 00000009020000000C025808 as the local engineID and 123456789ABCDEF000000000 as the remote engine ID, 171.69.37.61 as the IP address of the remote engine (copy of SNMP) and 162 as the port from which the remote device is connected to the local device:
router# show snmp engineID
Local SNMP engineID: 00000009020000000C025808
Remote Engine ID IP-addr Port
123456789ABCDEF000000000 171.69.37.61 162
0
0
B,D
Examples
The following example specifies 00000009020000000C025808 as the local engineID and 123456789ABCDEF000000000 as the remote engine ID, 171.69.37.61 as the IP address of the remote engine (copy of SNMP) and 162 as the port from which the remote device is connected to the local device:
router# show snmp engineID
Local SNMP engineID: 00000009020000000C025808
Remote Engine ID IP-addr Port
123456789ABCDEF000000000 171.69.37.61 162
0
0
New 300-206 Exam Questions and Answers (28/Sep/2017 Updated):
NEW QUESTION 259
A network engineer must manage and push configurations to a Cisco networking environment, in which 10 Cisco ASA with IPS modules reside. Which solution accomplishes this task?
A. Cisco Adaptive Security Device Manager to push configurations to each of the IPS units.
B. FireSIGHT manager to bundle and push configurations to the IPS units installed on an SSD within the Cisco ASA 5500 Series ASA.
C. Cisco Security Manager 4.5 or later and pushing configuration bundles to each of the IPS units.
D. Cisco IPS Manager Express and pushing configurations to the IPS units.
Answer: B
NEW QUESTION 260
When configuring packet-tracer command from CLI, what is the first option that you set?
A. source IP address
B. destination IP address
C. interface
D. protocol (ip, tcp, udp)
Answer: C
NEW QUESTION 261
What is a benefit the iOS control plane protection?
A. It allows QOS policing of aggregate control-panel
B. It provides for early dropping of packets directed toward closed
C. It prevents the input guide from being overwhelmed by any single
D. It minimizes the number of unprocessed packets a protocol can have
Answer: B
NEW QUESTION 262
Which two voice and video protocols does the Cisco ASA 5500 Series support with Cisco Unified Communications Application Inspection? (Chose two.)
A. SCTP
B. SDP
C. H.323
D. H248
E. SCCP
F. SRTP
Answer: CE
NEW QUESTION 263
Which two option are protocol and tools are used by management plane when using cisco ASA general management plane hardening?
A. Unicast Reverse Path Forwarding
B. NetFlow
C. Routing Protocol Authentication
D. Threat detection
E. Syslog
F. ICMP unreachables
G. Cisco URL Filtering
Answer: BE
NEW QUESTION 264
Which device can be managed by the Cisco Prime Security Manager?
A. ASA CX
B. ISR G2
C. Nexus
D. UCM
Answer: A
NEW QUESTION 265
A network engineer must mange and configurations to a cisco networking environment solutions accomplishes this task?
A. Cisco IPS manage express and pushing configuration to the IPS units.
B. Cisco security 4.5 or later and pushing configuration bundles to each of the IPS units.
C. Cisco adaptive security device manager to push configuration to each of the IPS.
D. Fire SIGHT manager to bundle and push configuration to the IPS units installed.
Answer: D
0
0