Refer to the exhibit. All EIGRP load balancing parameters are set to their defaults. You want
to use all the routes in the EIGRP topology for IP load balancing. Which two EIGRP
subcommands would you use to accomplish this goal? (Choose two.)
R1#show ip eigrp topology | section 0.0.0.0
P 0.0.0/0 2 successors, FD is 2174976
via 212.50.185.125 (2174976/2169859), Ethernet0/0
via 212.50.185.126 (2174976/2169859), Ethernet0/0
via 212.50.185.65 (2178816/2172416), Ethernet1/0
via 212.50.185.66 (2178816/2172416), Ethernet1/0
via 212.50.185.33 (2180096/2172416), Ethernet1/0
via 212.50.185.34 (2180096/2172416), Ethernet1/0
R1#show up route 0.0.0.0
Routing entry for 0.0.0.0/0 supernet
Known via “eigrp 212”, distance 170, metric 2174976,
candidate default path, type external
Redistributing via eigrp 212
Last update from 212.50.185.126 on Ethernet0/0, 00:00:32
ago
Routing Descriptor Blocks:
* 212.50.185.126, from 212.50.185.26. 00:00:32 ago via
Ethernet0/0
Route metric is 2174976, traffic share count is 1
Total delay is 20200 microseconds, minimum bandwidth is
1544 Kbit
Reliability 255/255, minimum MTU 1500 bytes
Loading 3/255, Hops 1
212.50.185.125, from 212.50.185.25. 00:00:32 ago via
Ethernet0/0
Route metric is 2174976, traffic share count is 1
Total delay is 20200 microseconds, minimum bandwidth is
1544 Kbit
Reliability 255/255, minimum MTU 1500 bytes
Loading 3/255, Hops 1

A.
traffic-share balanced

B.
distance

C.
maximum-paths

D.
default-network

E.
variance