Which two are TRUE of straight-through cable? (Choose two.)
A.
The wires on the cable are crossed over.
B.
It is also known as a patch cable.
C.
You can connect two routers using a straight-through cable.
D.
You can connect a hub to a switch using a straight through cable.
E.
You can connect a switch to a router using a straight through cable.
Explanation:
A straight-through cable is also known as a patch cable, and a straight-through cable is used to connect a
switch to a router. The following are the characteristics of a straight-through cable:
It is a twisted-pair copper wire cable.
The RJ-45 connectors at both ends have the same conductor arrangement.
It is also known as a patch cable.
You can connect a switch to a router using a straight-through cable.
You can connect a router to a hub or a workstation to a hub using a straight-through cable.
All the other options are incorrect because they are the characteristics of a crossover cable.Objective:
Network Fundamentals
Sub-Objective:
Select the appropriate cabling type based on implementation requirementsCisco > Support > Product Support > Routers > Cisco 10000 Series Routers > Troubleshoot and Alerts >
Troubleshooting Technotes > Ethernet 100BaseTX and 10BaseT Cables: Guidelines and Specifications
You can connect routers using a straight-through cable.
2
4
Today, but that wasn’t always the case. If you were a new Network Admin. for a company that still used old routers for a minor system, you’re straight out of luck and you might end up overthinking things on why they didn’t work all because you overlooked that one simple principle. I know an instance of some Network Admins who did an entire weeks worth of work only to discover that the solution to the problem was a simple one-line configuration that they overlooked. It applies here too. If you don’t keep the general rule and practice of using cross for similar devices, and straight for different category devices then you might get boned.
0
0
NO YOU CANT UNTIL INTERFACE SUPPORT MDIX SO INTERCONNECT THE SAME TYPE DEVICES YOU HAVE TO USE CROSSOVER CABLE
1
0