Which Network Address Translation (NAT) term is used for the IP address that is assigned to a host on the
inside network?

A.
Inside local address

B.
Inside global address

C.
Outside local address

D.
Outside global address

Explanation:
An inside local address is the NAT term that is used to describe the IP address assigned to a host on the inside
network. It is usually a private IP address.
An inside global address is the registered IP address assigned by the ISP, which represents one or more inside
local IP addresses externally.
An outside local address is the IP address of an external host as it appears to the internal network.
An outside global address is the IP address assigned to a host on the external network by the host owner. The
address is allocated from a globally routable address space.
NAT enables companies to use one IP addressing scheme within their network but translate those IP
addresses for external communication. Static NAT assigns a permanent one-to-one mapping of local
addresses to global addresses. Dynamic NAT assigns address mappings by using a pool of available
addresses. NAT overloading or Port Address Translation (PAT) reduces the number of global addresses
required by allowing multiple local hosts to share a global address.
Objective:
Infrastructure Services
Sub-Objective:
Configure, verify, and troubleshoot inside source NAT

Cisco > Support > Technology Support > IP > IP Addressing Services > Design > Design TechNotes > NAT:
Local and Global Definitions
Cisco > Articles > Network Technology > General Networking > Network Address Translation