Based on the exhibited output, which three statements are true? (Choose three.)
A.
All the routes are in the passive mode because R1 is in the query process for those
routes.
B.
R1 is in AS 200.
C.
R1 will load balance between three paths to reach the 192.168.1.48/28 prefix because all
three paths have the same advertised distance (AD) of 40512000.
D.
40512000 is the advertised distance (AD) via 192.168.1.66 to reach the 192.168.1.48/28
prefix.
E.
All the routes are in the passive mode because these routes are in the hold-down state.
F.
The best path for R1 to reach the 192.168.1.48/28 prefix is via 192.168.1.66.
Explanation:
It can be determined that AS 200 is used, from the fact that the IS-IS process ID is labeled
as 200. The best path to reach the network 192.168.1.48/28 is the first one displayed in the
routing table. This can be further demonstrated by the fact that the metric is less than the
alternative route, via serial 0. Finally, the AD can be found by viewing the second number
within the parentheses, which in this case is 40512000.
I do not understand why C is not correct
if maximum-paths is set = 4 by default…but of the alternate routes meet the feasibility criteria, and should both be viable load-shared paths.
0
1
You will only see load balanced routes, routes that are inserted into the routing table, not the topology table. You have no idea what the variance is set to so there is only one successor 192.168.1.66 (lowest FD for 192.168.1.48/28) and 2 feasible successors.
0
0
New Updated 300-101 Braindumps.v.2017-08-14
QUESTION 423
Which two methods use IPsec to provide secure connectivity from the branch office to the headquarters office? (Choose two.)
A. DMVPN
B. MPLS VPN
C. Virtual Tunnel Interface (VTI)
D. SSL VPN
E. PPPoE
Answer: AC
QUESTION 424
Which two statements about Frame Relay Point-to-Point connections are true? (Choose Two)
A. Changing a point-to-point sub interface to a different type requires the device to be reloaded.
B. They use two DLCIs to communicate with multiple endpoints over the Frame Relay cloud.
C. The device can establish a point-to-point connection to the cloud without a DLCI.
D. They can operate normally without a DLCI map.
E. Each physical interface that extends to the Frame Relay cloud can support a single SVC.
Answer: AB
QUESTION 425
What is the international standard for transmitting data over a cable system?
A. PPPoE
B. DOCSIS
C. CMTS
D. AAL5
Answer: B
QUESTION 426
Which interface type does a PPPoE client use to establish a session?
A. Physical
B. loopback
C. visual-template
D. dialer
Answer: D
QUESTION 427
The Cisco SA 500 Series Security Appliances are built specifically for businesses with less than 100 employees. What are three important benefits of this device? (Choose three)
A. business-grade firewall
B. premium support via SMART net
C. site-to-site VPN for remote offices
D. Cisco IOS software-based
E. email security
F. XML support
Answer: ACE
QUESTION 428
Which cisco Express Forwarding component maintains Layer 2 addressing information?
A. dCEF
B. adjacency table.
C. FIB
D. fast switching
E. RIB
Answer: B
QUESTION 430
Which two debug commands can you use to view issues with CHAP and PAP authentication? (Choose Two)
A. debug tacacs
B. debug ppp authentication
C. debug radius
D. debug aaa authentication
E. debug ppp negotiation
Answer: BE
QUESTION 431
Which DSL encapsulation method requires client software running on the end-user PC that is directly connected to a DSL modem?
A. PPPoA
B. PPPoE
C. PPP
D. L2TP
E. ATM
Answer: B
QUESTION 432
By default, which type of IPv6 address is used to build the EUI-64 bit format?
A. unique-local address
B. IPv4-compatible IPv6 address
C. link-local address
D. aggregatable-local address
Answer: C
QUESTION 433
For a GRE tunnel to be up between two routers, which of the following must be configured?
A. Loopback Interface
B. IP reachability between the loopback interfaces
C. Dynamic Routing between routers.
D. Tunnel interfaces must be in the same subnet.
Answer: D
QUESTION 434
……
I will always update the new updated 300-101 exam questions on my blog: http://www.passpmp.net/category/cisco/300-101-dumps
Welcome to follow me!
0
0
I have uploaded all the real questions of 300-101 exam to my Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDbHBiVVk1ZVhpOGc
Welcome to download them freely!
0
0
New Exam Collection 300-101 Dumps.v.2017-11-01.489q
QUESTION 463
Which two protocols can cause TCP starvation? (Choose two)
A. TFTP
B. SNMP
C. SMTP
D. HTTPS
E. FTP
Answer: AB
QUESTION 464
Refer to the exhibit. How can you configure a second export destination for IP address 192.168.10.1?
A. specify a different TCP port
B. specify a different UDP port
C. specify a VRF
D. configure a version 5 flow-export to the same destination
E. specify a different flow ID
Answer: C
QUESTION 465
Which value does Frame Relay use to identify a connection between a DTE and DCE?
A. DLCI
B. IP address
C. MAC address
D. VLAN ID
Answer: A
QUESTION 466
Which two options are limitations of Stateful NAT64? (Choose two)
A. it is unable to route VRF traffic
B. it is unable to route multicast traffic
C. it supports FTP traffic only with an ALG
D. it supports DNS64 only
E. layer 4 supports TCP only
Answer: AB
QUESTION 467
If you want to migrate an IS-IS network to another routing protocol with…..? (Choose two)
A. UDP
B. internal BGP
C. TCP/IP
D. EIGRP
E. OSPF
F. RIP
Answer: DE
QUESTION 468
IP CEF load-sharing options (Choose three)
A. Tunnel
B. Universal
C. Include-ports
D. Source
E. Destination
Answer: ABC
QUESTION 469
What is the minimum privilege level to enter all commands in usermode?
A. Level14
B. Level0
C. Level1
D. Level15
Answer: C
QUESTION 470
Which two statements about password-protecting device access are true? (Choose two)
A. The more system:running-config command displays encrypted passwords in clear text
B. The service password-encryption command forces a remote device to encrypt the password
C. A network administrator can recover an encrypted password
D. The privilege level command controls the commands a specific user can execute
E. The password can be encrypted in the running configuration
Answer: DE
QUESTION 471
……
More questions are on my blog: http://www.itexams.org/?s=300-101
Hope it can help u a lot!
0
0