Refer to the exhibit.

Which Cisco ASA CLI nat command is generated based on this Cisco ASDM NAT configuration?

A.
nat (dmz, outside) 1 source static any any

B.
nat (dmz, outside) 1 source static any outside

C.
nat (dmz,outside) 1 source dynamic any interface

D.
nat (dmz, outside) 1 source dynamic any interface destination dynamic outside outside

E.
nat (dmz, outside) 1 source static any interface destination static any any

F.
nat (dmz, outside) 1 source dynamic any outside destination static any any

Explanation:
Pretty straight forward – like this example
http://tunnelsup.com/2011/06/24/nat-for-cisco-asas-version-8-3/ Regular Dynamic PAT
To create a many-to-one NAT where the entire inside network is getting PAT’d to a single outside IP do the following.
Old 8.2 command:
nat (inside) 1 10.0.0.0 255.255.255.0
global (outside) 1 interface
New 8.3 equivalent command:
object network inside-net subnet 10.0.0.0 255.255.255.0 nat (inside, outside) dynamic interface
Note: the interface command is the 2nd interface in the nat statement, in this case the outside.