A Cisco Nexus 2000 Series Fabric Extender is connected to two Cisco Nexus 5000 Series
switches via a vPC link. After both Cisco Nexus 5000 Series switches lose power, only one switch

is able to power back up. At this time, the Cisco Nexus 2000 Series Fabric Extender is not active
and the vPC ports are unavailable to the network.
Which action will get the Cisco Nexus 2000 Series Fabric Extender active when only one Cisco
Nexus 5000 Series switch is up and active?

A.
Move the line from the failed Cisco Nexus 5000 Series switch to the switch that is powered on,
so the port channel forms automatically on the switch that is powered on.

B.
Shut down the peer link on the Cisco Nexus 5000 Series switch that is powered on.

C.
Configure reload restore or auto-recovery reload-delay on the Cisco Nexus 5000 Series switch
that is powered on.

D.
Power off and on the Cisco Nexus 2000 Series Fabric Extender so that it can detect only one
Cisco Nexus 5000 Series switch at power up.