FabricPath switch-id is 25 and load-balance is configured for L3/L4 and rotate amount is 14 byte.
What information is true about FabricPath switch-id?
A.
FabricPath topology requires manual configuration of switch-id which has a range from 1 to
4095
B.
Every FabricPath must have a manually configured switch-id for it to form a FabricPath
topology
C.
FabricPath topology requires manual configuration of switch-id which has a range from 1 to
4099
D.
You do not have to manually assign a switch ID unless you are running a virtual port channel
plus (vPC*) because the system assigns a switch ID for you when you enable FabricPath
Correct answer is D. Refer to:
http://www.cisco.com/en/US/docs/switches/datacenter/sw/6_x/nx-os/fabricpath/command/reference/fp__cmds.html#wp2266320
“You do not have to manually assign a switch ID (unless you are running a vPC+); the system assigns a switch ID for you when you enable FabricPath.”
0
0
Completely agree with Kakat.Answer should be D NOT B.
0
0
Agree…..Its D not B
0
0
What’s more, part of new 195Q 300-165 dumps are available here:
https://drive.google.com/open?id=0B-ob6L_QjGLpMVRmUUJZRWU3cU0
Best Regards!
0
0