Refer to the topology and partial switch command output shown in the graphic. The internetwork
shown in the diagram is experiencing connectivity problems. Host A is unable to ping Host B.
What needs to be done to enable these hosts to ping each another?

A.
The Fa0/1 interface on the ET-1 switch must be configured as a trunk port.

B.
Switch port Fa0/1 must be moved to a different VLAN.

C.
VLAN 2 must be named.

D.
The gateway on Host A needs to be changed.

E.
The IP address on Host B needs to be reconfigured.

Explanation:
Interface FA0/1 should be in any case configured as a trunk port so that a router could switch
packets between the VLANs. The IP addresses are acceptable, so no issues should be caused
due this.