Refer to the exhibit. You have decided to use the individual ports in trunking on your Cisco 4402- 50 controller. You have placed one port on each separate switch as shown and you have fully loaded 50 access points on this controller, placing 25 APs on each physical port and associated AP manager interface. During a power outage, you have lost one of these switches. Your access layer is unaffected and all 50 access points still have power and attempt to move to the other physical port and rejoin the AP manager interface that remains up. How many access points will be able to connect to this controller?

Select the best response.

Exhibit:

Refer to the exhibit. You have been tasked with deploying your company’s wireless LWAPP deployment within an area that must have the best possible availability you can provide. Although
a supported design, which disadvantage does the shown solution have?

Select the best response.

Exhibit:

Refer to the exhibit. You have a Cisco WLC 2106 with two APs connected on the PoE ports. You have configured the internal DHCP server of the Cisco WLC with a scope to assign IP addresses to APs and wireless clients alike. However, the APs are not able to join the controller. Based on the output of the show commands, what should you do to fix the problem?

Select the best response.

Exhibit:

Refer to the exhibit. You manage your multinational company’s deployment. The Cisco WLCs are located in a data center in Spain. A new batch of APs have failed to join the controllers. Based on the debug output, what is the reason for this behavior? Select the best response.

Exhibit:

Refer to the exhibit. With an AP configured in H-REAP in the branch office as shown, if the WAN link were to be lost, which three features and capabilities could still exist? (Choose three.)

Select 3 response(s).

Exhibit:

You are configuring the Client Roaming behavior of the Cisco WLC and you are looking to change the RF Parameters to improve roaming. The Transition Time option changes which characteristic of the Cisco Compatible Extensions Client Roaming behavior? Select the best response.

You have configured Symmetric Mobility with AES for mobility data encryption. Which UDP port does this mobility exchange use?
Select the best response.

You have configured multiple country codes on your controller. You are using the Cisco WLC GUI to set the individual APs to the appropriate country code. How will this effect any associated clients on a changed AP?
Select the best response.

You are working in a global company. You have been tasked to configure two redundant controllers that are not specific for any one country. How many countries can you select per controller with the country feature using Cisco WLC version 5.2? Select the best response.

On your campus, you have a controller in each building and they are close enough that users can roam seamlessly between them. You have received several complaints that users in your main building are experiencing one-way audio problems when they walk into the central building. What is the cause of this issue?
Select the best response.