vyatta@VYA1:~$ show ip route ospf O 192.168.12.0/24 [110/1] is directly connected, eth2,
00:07:36 O 192.168.13.0/24 [110/1] is directly connected, eth3, 00:07:36 O *>
192.168.23.0/24 [110/2] via 192.168.12.2, eth2, 00:05:05
*> [110/2] via 192.168.13.3, eth3, 00:05:05 O 192.168.101.0/24 [110/1] is directly connected,
eth1, 00:07:36 O *> 192.168.128.0/24 [110/2] via 192.168.12.2, eth2, 00:05:53 O *>
192.168.129.2/32 [110/11] via 192.168.12.2, eth2, 00:05:53 O *> 192.168.130.2/32 [110/11]
via 192.168.12.2, eth2, 00:05:53 O *> 192.168.131 .2/32 [110/11] via 192.168.12.2, eth2,
00:05:53 O *> 192.168.160.0/24 [110/2] via 192.168.13.3, eth3, 00:05:05 O *>
192.168.161.3/32 [110/11] via 192.168.13.3, eth3, 00:05:05 O *> 192.168.162.3/32 [110/11]
via 192.168.13.3, eth3, 00:05:05 O *> 192.168.163.3/32 [110/11] via 192.168.13.3, eth3,
00:05:05 vyatta@VYA1:~$ show ip route summary IP routing table name is Default-IPRouting-Table(0) IP routing table maximum-paths is 8 Route Source Networks connected 7
static 1 ospf 9 Total 17 FIB 9 vyatta@VYA1:~$
With all routing settings at system defaults, which statement is true about the interface VYA1
will use to transmit traffic destined for 192.168.23.15?

A.
Only interface Ethernet 2 will be used.

B.
Only interface Ethernet 3 will be used.

C.
The Brocade Vyatta device will load-balance packet by packet out both Ethernet 2 and
Ethernet
3.

D.
The Brocade Vyatta device will load-balance session by session out both Ethernet 2 and
Ethernet 3.