vyatta@VYA1:~$ show ip ospf neighbor
OSPF process 0: Neighbor ID Pri State Dead Time Address Interface
192.168.131.2 1 Full/Backup 00:00:38 192.168.12.2 eth2
192.168.163.3 1 Init/DROther 00:00:33 192.168.13.3 eth3 vyatta@VYA1:~$
10.1.16 vyatta@VYA1:~$ show ip ospf database
OSPF Router with ID (172.24.42.51) (Process ID 0)
Router Link States (Area 0.0.0.0)
Link ID ADV Router Age Seq# CkSum Link count
172.24.42.51 172.24.42.51 167 0x80000008 0xa98e 3
172.24.42.52 172.24.42.52 166 0x80000006 0x21e7 3
172.24.42.53 172.24.42.53 6 0x8000000b 0x7854 3
172.24.42.54 172.24.42.54 7 0x80000003 0x1183 4
Net Link States (Area 0.0.0.0)
Link ID ADV Router Age Seq# CkSum
192.168.12.1 172.24.42.51 327 0x80000002 0x92e8
192.168.13.3 172.24.42.53 32 0x80000002 0x6d08
192.168.23.3 172.24.42.53 602 0x80000002 0x0d5d
192.168.160.3 172.24.42.53 10 0x80000003 0x3e9f
AS External Link States
Link ID ADV Router Age Seq# CkSum Route Tag 0.0.0.0 172.24.42.51 187 0x80000003
0x04a1 E2 0.0.0.0/0 254 vvyatta@VYA1:~$
Which statement describes the status shown in the output?

A.
The device is exchanging link-state information with the peer on eth3.

B.
The device has not formed an adjacency with the peer on eth3.

C.
The device is negotiating the designated router for eth3.

D.
The device is running the SPF algorithm.