Refer to the exhibit.

A network administrator has set up MPLS on the switches shown in the exhibit. The administrator wants to verify that PE-1 can use MPLS to forward
traffic to Site 3, as well as see the labels used along the path. Which step should the administrator take to obtain this information?

A company is using MCE to create a multi-tenant data center solution. Network administrators want to isolate all management functions in a VPN
instance “Management”. Each switch has an IP address in 10.0.2.0/24 on its Management Ethernet port, and HP IMC manages the switches on these IP
addresses. Administrators assign the Management Ethernet interfaces to the “Management” VPN instance. IMC begins losing data from the switches.
How should administrators fix the problem on each switch?

A customer has five data centers. Each data center hosts 10 tenants and separates the tenants using VLAN assignments.
The network administrator is connecting the data centers using EVI.
How should the administrator separate the tenant traffic over the EVI links?

Refer to the exhibit.

A network administrator wants to create a leaf and spine topology. How should the administrator connect the switches for the best latency and loadbalancing?

Refer to the exhibit.

The switches in the exhibit are using SPBM. An administrator wants to send CustomerA traffic directly over the new link, shown by the dotted line in the
exhibit, as a premium service for that customer. The existing links will be used for backup. The new link is reserved for CustomerA traffic.
How does the administrator set up Switch 1 to help to achieve this goal?

Refer to the exhibit.

The switches shown in the exhibit form a TRILL region. The network administrator has enabled TRILL. What helps to ensure that Switch 2 sends
multicasts and broadcasts over both of its switch-to-switch links?

A network administrator has installed an SDN application from the HP SDN AppStore on the HP VAN SDN Controller. If the application is running and
ready to service requests, which status should the administrator see in the controller’s Applications window?

A company has a data center that hosts multiple tenants. The company is adding a second and third data center. The core of each data center is an IRF
virtual switch.
These are the IRF connections:
IRF 1 is the core of the first data center.
IRF 2 is the core of the second data center.
IRF 3 is the core of the third data center.
The three data centers are fully interconnected with dark fiber.
IRF 1, IRF 2, and IRF 3 have connections to a WAN and to the Internet.
Which option for the connections between the data centers provides the best resiliency and stability?

Refer to the exhibit.

A network administrator wants to connect four data centers using HP EVI. What is the correct setup for the EVI tunnel interfaces?

Refer to the exhibits on the Exhibit 1 and Exhibit 2 tabs.
Exhibit 1

Exhibit 2

Network clients are configured to use the switch as their default gateway in VLAN 2. The HP Comware switch places VLAN 2 in OpenFlow instance 1.
An SDN application has created the flow entry shown in Exhibit 1 to route traffic from 10.1.2.0/24 to 10.1.3.0/24. Exhibit 1 does not show the output
interface for the flow.
Which output interface supports the needs of this scenario?