What is the maximum distance of the cable run supported in this situation?
A company has a Fibre Channel environment and wants to connect a new host in a remote data center using
50/125um OM2 multi-mode fiber cable and needs to support 2 Gb speeds.
What is the maximum distance of the cable run supported in this situation?
what is the appropriate FC topology?
Which FC SAN topology provides the best performance and scalability?
Which FC SAN topology provides the best performance and scalability?
what is the appropriate FC switch topology?
what is the appropriate FC switch topology?
what is the maximum free space available in the volume?
A 200-GB LUN is created in an empty 500-GB volume with the volume guarantee option set to Volume. LUN
reservation is enabled and the fractional reserve is set to 100 and scheduled snapshots are disabled.
Directly after LUN creation, what is the maximum free space available in the volume?
What is the current capacity utilization on both the host and the disk array?
A 100-GB thinly provisioned LUN is allocated to a Windows host. 100 GB of data is written into the LUN. The
current capacity utilization on the disk array as well as the host is 100%. 50 GB of data is deleted from the
LUN. Space reclaimer has NOT been run.
What is the current capacity utilization on both the host and the disk array?
Which set of commands should be used for troubleshooting Ethernet connectivity problems from the storage syste
Which set of commands should be used for troubleshooting Ethernet connectivity problems from the storage
system console?
What is the minimum number of igroups that need to be created to map a LUN to the cluster?
A customer has a four-node SUN cluster configuration. Each node has two, dual-ported HBAs.
What is the minimum number of igroups that need to be created to map a LUN to the cluster?
you need to terminate CIFS on the storage system and do a restart for the changes to take effect.
If you change the setting for the option cifs.neg_buf_size, you need to terminate CIFS on the storage system
and do a restart for the changes to take effect.