Your network contains a server named Server1 that runs Windows Server 2008 R2. The network for
Server1 is configured as shown in the table.

You plan to deploy DirectAccess on Server1. You need to configure the network interfaces on
Server1 to support DirectAccess. What should you do?

A.
Add the IP address of 10.1.2.2 to LAN1.

B.
Remove the IP address of 131.107.1.13 from Internet2, and then add the address to LAN1.

C.
Remove the IP of address 131.107.1.13 from Internet2, and then add the address to Internet1.

D.
Add the default gateway of 131.107.1.1 to Internet2.