Your network contains a single Active Directory site. You plan to deploy 1,000 new computers that
will run Windows 7 Enterprise. The new computers have Preboot Execution Environment (PXE)
network adapters. You need to plan the deployment of the new computers to meet the following
requirements:
•Support 50 simultaneous installations of Windows 7
•Minimize the impact of network operations during the deployment of the new computers
•Minimize the amount of time required to install Windows 7 on the new computers
What should you include in your plan?
A.
Deploy the Windows Deployment Services (WDS) server role. Configure the IP Helper tables on all
routers.
B.
Deploy the Windows Deployment Services (WDS) server role. Configure each WDS server by using
native mode.
C.
Deploy the Windows Deployment Services (WDS) server role and the Transport Server feature.
Configure the Transport Server to use a custom network profile.
D.
Deploy the Windows Deployment Services (WDS) server role and the Transport Server feature.
Configure the Transport Server to use a static multicast address range.
Explanation:
http ://technet.microsoft.com/en-us/library/cc726564%28WS.10%29.aspx
http ://technet.microsoft.com/en-us/library/cc725964%28WS.10%29.aspx
WDS Multicast Server
Updated: November 21, 2007
Applies To: Windows Server 2008
The multicast server deploys an image to a large number of client computers concurrently without
overburdening the network. When you create a multicast transmission for an image, the data is sent
over the network only once, which can drastically reduce the network bandwidth that is used.
Using Transport Server
Updated: May 8, 2008
Applies To: Windows Server 2008
This topic only applies to Windows Server 2008. If you have Windows Server 2008 R2, see
Configuring Transport Server.
You have two options when installing the Windows Deployment Services role in Windows Server
2008. You can install both the Deployment Server and Transport Server role services (which is the
default) or you can install only the Transport Server role service. The second configuration is for
advanced scenarios, such as environments without Active Directory Domain Services (AD DS),
Domain Name System (DNS), or Dynamic Host Configuration Protocol (DHCP). You can configure
Transport Server to enable you to boot from the network using Pre-Boot Execution Environment
(PXE) and Trivial File Transfer Protocol (TFTP), a multicast server, or both. Note that Transport Server
does not contain or support the Windows Deployment Services image store.
Configure how to obtain IP addresses. If multiple servers are using multicast functionality on a
network (Transport Server, Deployment Server, or another solution), it is important that each server
is configured so that the multicast IP addresses do not collide. Otherwise, you may encounter
excessive traffic when you enable multicasting. Note that each Windows Deployment Services server
will have the same default range. To work around this issue, specify static ranges that do not overlap
to ensure that each server is using a unique IP address, or configure each of the servers to obtain
multicast addresses from a Multicast Address Dynamic Client Allocation Protocol (MADCAP) server.
The server architectures are illustrated in the following diagram. The blue parts are installed with
Transport Server and the Deployment Server. The grey parts are installed with the Deployment
Server only. The yellow parts are not installed with either, but can be written using guidelines in the
Windows SDK.
