You are deploying a small network that has 30 client computers. The network uses the 192.168.1.0/24 address
space. All computers obtain IP configurations from a DHCP server named Server1.
You install a server named Server2 that runs Windows Server 2016. Server2 has two network adapters named
internal and Internet. Internet connects to an Internet service provider (ISP) and obtains the 131.107.0.10 IP
address. Internal connects to the internal network and is configured to use the 192.168.1.250 IP address.
You need to provide Internet connectivity for the client computers.
What should you do?

You have a DHCP server named Server1 that runs Windows Server 2016.
You have a single IP subnet.
Server1 has an IPv4 scope named Scope1. Scope1 has an IP address range of 10.0.1.10 to 10.0.1.200 and a
length of 24 bits.
You need to create a second logical IP network on the subnet. The subnet will use an IP address range of
10.0.2.10 to 10.0.2.200 and a length of 24 bits.
What should you do?

HOTSPOT
You have a Windows Server 2016 failover cluster that has a cluster network named ClusterNetwork1.
You need to ensure that ClusterNetwork1 is enabled for cluster communication only.
What command should you run? To answer, select the appropriate options in the answer area.
Hot Area:

HOTSPOT
You have an Active Directory domain named Contoso.com. The domain contains Hyper-V hosts named
Server1 and Server2 that run Windows Server 2016. The Hyper-V hosts are configured to use NVGRE for
network virtualization.
You have six virtual machines that are connected to an external switch. The virtual machines are configured as
shown.

To which virtual machine or virtual machines can VM1 and VM3 connect? To answer, select the appropriate
options in the answer area.
Hot Area:image:Img14-14.jpg