One Comment on “Which configuration causes RIP-learned routes to be advertised to other RIP neighbors?”

1. Rachid says:

   March 14, 2015 at 8:00 am

   The default policy for RIP is to import all routes learned from explicitly configured neighbors. The software ignores routes learned
   from neighbors not explicitly defined within the configuration. By default, the software does not export routes to RIP neighbors,
   including RIP routes. Thus, to advertise any routes to RIP neighbors, you must configure an export policy that matches and
   accepts RIP routes as shown in the following sample output:
   [edit policy-options]
   user@router# show
   policy-statement export-rip-routes {
   term match-rip-routes {
   from protocol rip;
   then accept;
   }
   }
   For RIP, you can apply import policies at the protocol level and neighbor level, whereas you can configure export policies only at
   the group level as shown in the following sample output:
   [edit protocols rip]
   user@router# show
   group my-rip-group {
   export export-rip-routes;
   neighbor ge-0/0/1.0;
   neighbor se-1/0/0.0;
   }

   
   
   
   0

   
   
   
   0