PrepAway - Latest Free Exam Questions & Answers

What must be configured to remotely manage a NetScreen device operating in transparent mode?

What must be configured to remotely manage a NetScreen device operating in transparent mode?

PrepAway - Latest Free Exam Questions & Answers

A.
An IP address must be configured for VLAN1

B.
The telnet management service must be enabled on the VLAN1 interface only

C.
An IP address must be configured for the VLAN zone

D.
The V1-Trust interface needs to have management services enabled

E.
The public SNMP community string must be configured

Explanation:
When an interface is in Transparent mode, the NetScreen device filters packets traversing the firewall without
modifying any of the source or destination information in the IP packet header. All interfaces behave as though they are part of the same network, with the NetScreen device acting much like a Layer 2 switch or bridge. In Transparent mode, the IP addresses of interfaces are set at 0.0.0.0, making the presence of the NetScreen device invisible, or "transparent," to users. By default, ScreenOS creates one function zone, the VLAN zone, and three L2 security zones: V1-Trust, V1-Untrust, and V1-DMZ. When the NetScreen device is in Transparent mode, you use the VLAN1 interface for managing the device and terminating VPN traffic. Transparent mode is a convenient means for protecting Web servers, or any other kind of server that mainly receives traffic from untrusted sources. Using Transparent mode offers the following benefits:
No need to reconfigure the IP settings of routers or protected servers No need to create Mapped or Virtual IP addresses for incoming traffic to reach protected servers


Leave a Reply