what happens to a DS5300?
You have a power outage, what happens to a DS5300?
Where do you configure SNMP trap destination in the Storage Manager GUI?
Where do you configure SNMP trap destination in the Storage Manager GUI?
What is required for managing a storage subsystem through the Fibre Channel IO path?
What is required for managing a storage subsystem through the Fibre Channel IO path?
what is NOT required?
When performing an array migration, what is NOT required?
What is the minimum firmware level required for an upgrade to firmware 7.10.xx?
What is the minimum firmware level required for an upgrade to firmware 7.10.xx?
where do you enable the rlogin/Telnet feature?
Using Storage Manager where do you enable the rlogin/Telnet feature?
What is the cause of this problem?
A customer has the following configuration:
Channel 1: 4 EXP810’s fully populated with 300 GB FC drives
Channel 2: 3 EXP810’s fully populated with 146 GB FC drives
Channel 3: 3 EXP810’s fully populated with 500 GB SATA drives
Channel 4: 3 EXP810’s fully populated with 750 GB SATA drives
To increase fibre capacity, the customer decides to add another EXP810, fully populated with 146
GB FC drives to channel 3. When the additional EXP810 is installed, the DS4800 enters into a
continuous reboot cycle. What is the cause of this problem?
What is the least expensive option while maintaining business continuity?
A customer is experiencing latency problems and high bandwidth utilization across their WAN link.
What is the least expensive option while maintaining business continuity?
What should be analyzed on the attached hosts?
A DS4700, which has a number of Windows and AIX hosts attached, is being scheduled for
microcode upgrade to take advantage of new features. In addition to the DS4700 microcode
upgrades, the attached hosts also need to be analyzed to determine if changes are necessary to
accommodate the DS4700 microcode upgrades. What should be analyzed on the attached
hosts?
What is the first step you should take to address this problem?
A drive has reported that a failure prediction threshold has been exceeded, indicating that the
drive might fail soon. What is the first step you should take to address this problem?