An administrator is designing a new system. Redundancy is critical, and cost must be kept as low
as possible.
The system planned is a Power 770 with 2 enclosures, each with a 10Gb IVE. It will support 6
dedicated production LPARs, 8 development LPARs, and 2 VIO Servers.
Production and development networks must be separate from each other.
Which of the following network solutions supports the requirements above?

A company needs to implement a virtual environment on a Power 770 server using a Virtual I/O
Server and a large number of clients. What network solution can be implemented on the Virtual I/O
Server to maximize bandwidth for the clients?

An administrator must create several production and development LPARs on a new Power 770
server. Processor requirements for the development LPARs change frequently.
Which configuration will isolate the production LPARs from changes in processing requirements
for the development LPARs?

A customer is planning to migrate an existing AIX 7 environment from POWER5 hardware to
POWER7. The existing deployment consists of multiple machines, each hosting many LPARs.
Due to software licensing constraints, the new environment must maintain the same number of
logical CPUs. The pmcycles command reports the following on an LPAR on the POWER5
environment:
$ pmcycles -m
CPU 0 runs at 2198 MHz
CPU 1 runs at 2198 MHz
CPU 2 runs at 2198 MHz
CPU 3 runs at 2198 MHz

CPU 4 runs at 2198 MHz
CPU 5 runs at 2198 MHz
CPU 6 runs at 2198 MHz
CPU 7 runs at 2198 MHz
How many virtual CPUs should be assigned to the destination LPAR on the POWER7
environment?

An administrator needs to add additional LPARs to a Power 770 server, but all of the available
memory on the system is currently assigned to existing LPARs and is continually utilized.
What solution can the administrator implement on the system to add the LPARs?

When many LPARs require large quantities of SAN LUNs, what is a benefit of leveraging NPIV
over more traditional vSCSI virtualization?

An architect is designing a new POWER7 implementation consisting of a VIO Server (VIOS) and 6
AIX partitions.
AIX partitions need to occasionally access a tape drive for restoration and backup of application
data and tape access will not be required by more than on partition at any time.
The performance of the solution is not critical and the architect wants to keep the cost to a
minimum.
Which of the following configurations will address the architects requirements?

An architect has been given the task of incorporating some new Power Systems servers running
AIX 7 into an existing data center which is supported by a legacy SAN.
The new servers will need to be connected to the SAN, and the LPARs on the servers will each
have access to a Fibre Channel Tape using virtualized devices.
Which action will the architect need to take?

A client is planning to purchase a Power 770 with 2 enclosures, and needs to have redundancy for
multiple LPARs. Which of these solutions provides the most redundancy for the LPARs at least
cost?

A new VIO Server environment has been created to support several VIO Clients. Disks have been
assigned to both VIO Servers. Which of the following will ensure that disks can be mapped from
both VIO Servers?