An application is configured on an LTM device:
Virtual server: 10.0.0.1:80 (VLAN vlan301)
SNAT IP: 10.0.0.1
Pool members: 10.0.1.1:8080, 10.0.1.2:8080, 10.0.1.3:8080 (VLAN vlan302)
Which packet capture should the LTM Specialist perform on the LTM device command line interface to
capture only server traffic specifically for this application?

A.
tcpdump -ni 0.0:nnn -s 0 ‘host 10.0.0.1’ -w /var/tmp/trace.cap

B.
tcpdump -ni vlan301 -s 0 ‘port 80 and host 10.0.0.1’ -w /var/tmp/trace.cap

C.
tcpdump -ni vlan302 -s 0 ‘port 8080 and (host 10.0.1.1 or host 10.0.1.2 or host 10.0.1.3)’ -w /var/tmp/
trace.cap

D.
tcpdump -ni 0.0:nnn -s 0 ‘(port 80 and host 10.0.0.1) or (port 8080 and host 10.0.1.1 or host 10.0.1.2 or
host 10.0.1.3)’ -w /var/tmp/trace.cap