What is a radome?

What kind of antenna results in a nearly circular pattern on the azimuth chart but a very flat donut shape on the elevation chart?

You deployed an AP and installed its antenna, and you now need to set the AP transmit power. Given a desired EIRP of 21 dBm, and an antenna gain of 5.85 dBd
connected through 25 feet of cable with a loss specification of 4 dB/100 feet.
Assuming that there is no significant loss from the connectors, what should be the transmit power level for this AP?

What is the purpose of DHCP Option 43, and how is it used with WLANs?

Given: A WLAN controller is connected to ABC Company’s core layer 3 Ethernet switch with an IEEE 802.1Q trunk connection. The WLAN controller’s native VLAN
is VLAN 6 and its IP address is 10.0.14.2 /24. Lightweight APs supporting centralized forwarding are connected to the network on VLANs 7, 8, and 9, and they each
build a Layer 3 tunnel back to the WLAN controller’s IP address.
The dynamically assigned IP addresses received by each AP from a DHCP server will be ________________.

An associated STA detects a new BSS with the same SSID as the STA’s current BSS. The new BSS uses a different IP subnet than the current BSS. If the STA is
configured to use 802.1X/EAP preauthentication, what is likely to occur?

In a multiple channel architecture (MCA) network supporting 802.1X authentication, what aspect of WLAN design affects client roaming efficiency and
effectiveness?

In a large enterprise (5000+ wireless users), by what would NOT be a recommended method by which IP addresses and VLANs are assigned to different clients
associated to the same AP?

Given: For this fill-in the blank question, each answer option contains an answer for the first and second blanks, separated by a dash “—”. Choose the answer
option that correctly fills in both blanks in the following sentence.
A WLAN may use 802.11 admission control to ________, and admission control requirements are configured separately for each ________.

ABC Company has a WLAN controller with 10 controller-based APs; the Voice SSID is configured for centralized data forwarding. Each AP is connected to an
access port on a layer-2 Ethernet switch. Each layer-2 switch is uplinked to a single layer-3 core Ethernet switch. The WLAN controller is connected directly to the
layer-3 core Ethernet switch. Layer-3 tunnels are created between all controller-based APs and the WLAN controller. A voice server is connected to the layer-3
Ethernet switch.
When a voice-enabled QoS STA sends an IP data packet to a voice server in this scenario, the DSCP value carried in the STA’s IP data packet gets mapped to
what and by which device?