The dynamically assigned IP addresses received by each …
Given: A WLAN controller is connected to ABC Company’s core layer 3 Ethernet switch with an IEEE 802.1Q trunk connection. The WLAN controller’s native VLAN
is VLAN 6 and its IP address is 10.0.14.2 /24. Lightweight APs supporting centralized forwarding are connected to the network on VLANs 7, 8, and 9, and they each
build a Layer 3 tunnel back to the WLAN controller’s IP address.
The dynamically assigned IP addresses received by each AP from a DHCP server will be ________________.
what is likely to occur?
An associated STA detects a new BSS with the same SSID as the STA’s current BSS. The new BSS uses a different IP subnet than the current BSS. If the STA is
configured to use 802.1X/EAP preauthentication, what is likely to occur?
what aspect of WLAN design affects client roaming effic…
In a multiple channel architecture (MCA) network supporting 802.1X authentication, what aspect of WLAN design affects client roaming efficiency and
effectiveness?
what would NOT be a recommended method by which IP addr…
In a large enterprise (5000+ wireless users), by what would NOT be a recommended method by which IP addresses and VLANs are assigned to different clients
associated to the same AP?
A WLAN may use 802.11 admission control to ________, an…
Given: For this fill-in the blank question, each answer option contains an answer for the first and second blanks, separated by a dash “—”. Choose the answer
option that correctly fills in both blanks in the following sentence.
A WLAN may use 802.11 admission control to ________, and admission control requirements are configured separately for each ________.
what and by which device?
ABC Company has a WLAN controller with 10 controller-based APs; the Voice SSID is configured for centralized data forwarding. Each AP is connected to an
access port on a layer-2 Ethernet switch. Each layer-2 switch is uplinked to a single layer-3 core Ethernet switch. The WLAN controller is connected directly to the
layer-3 core Ethernet switch. Layer-3 tunnels are created between all controller-based APs and the WLAN controller. A voice server is connected to the layer-3
Ethernet switch.
When a voice-enabled QoS STA sends an IP data packet to a voice server in this scenario, the DSCP value carried in the STA’s IP data packet gets mapped to
what and by which device?
How many distinct priority levels do you expect for the…
You are working on a VoWLAN design with your customer’s wired networking team. How many distinct priority levels do you expect for the voice applications?
What is the DSCP Per Hop Behavior equivalent classifica…
What is the DSCP Per Hop Behavior equivalent classification of the 802.11 AC_VO priority level?
What setting would be most effective at achieving this …
You are tasked with designing the WLAN to accommodate certain high density areas on your university campus where users frequently come and go. With a limited
DHCP pool size (subnet mask = 255.255.252.0) for this WLAN subnet, you want to ensure that your DHCP addresses are used efficiently and are not exhausted,
which would prevent new client Layer 3 connections. The DHCP server is a Windows Server 2012 R2 machine. Your design task is to determine the best
configuration to allow as many users as possible while avoiding WLAN service interruptions and also to use the available addresses as efficiently as possible.
What setting would be most effective at achieving this design task?
What 802.11n features (from the numbered list below) ar…
You desire to achieve a 450 Mbps MCS. What 802.11n features (from the numbered list below) are required?
1. Frame aggregation
2. Short GI
3. 40 MHz channels
4. 2 spatial streams
5. 3 spatial streams
6. Transmit beamforming (TxBF)