DRAG DROP
Select and Place:

DRAG DROP

You are tasked with creating a network that will accomplish the following requirements
Requirements:
1) The remote sales team must be able to connect to the corporate network
2) Each department must have ONLY two PCs and a server
3) Each department must be segmented from each other
4) The following VLANs have been designated:
a) VLAN 2- Finance
b) VLAN 12- Sales
c) VLAN 22- Human Resources (HR)
Complete the network by dragging the required objects into the diagram
INSTRUCTIONS: Objects can be used multiple times and not all placeholders need to be filled
Select and Place:

CORRECT TEXT
SIMULATION
You have been tasked with setting up a wireless network in an office. The network will consist of 3 access points and a single switch. The network must meet the
following parameters.
The SSIDs need to be configured as corpnet with a key of S3cr3t!
The wireless signals should not interfere with each other
The subnet the Access points and Switch are on should only support 30 devices maximum
The access Points should be configured to only support TKIP clients at a maximum speed
Instructions: Click on the devices to review their information and adjust the setting of the APs to meet the given requirements.

A company installs a new mail server. Which of the following DNS records need to be configured to allow the organization to receive email?

CORRECT TEXT
SIMULATION
After recent changes to the pictured network, several users are unable to access the servers. Only PC1, PC2, PC3, and PC4 are configurable. You can only change
the adapter configurations to each PC.

DRAG DROP
Your company recently purchased a new building down the street from the existing office.
For each of the tasks below, select the appropriate antenna type and encryption object for all wireless access point (AP).
1. Create an encrypted wireless connection between the two buildings that BEST controls signal propagation, while maximizing security.
2. Restrict the wireless signal generated by the access points (AP’s) inside Building 1, so that it minimizes broadcast beyond the building.
3. Maximize wireless coverage inside Building 1.
4. Building 1’s internal wireless network is for visitors only and must not require any special configuration on the visitor’s device to connect.
Select and Place:

DRAG DROP
Wireless network users recently began experiencing speed and performance issues after access point 2 (AP2) was replaced due to faulty hardware. The original
network was installed according to a consultant’s specifications and has always worked without a problem.
You a network technician, have been tasked with evaluating the situation and resolving the issues to improve both performance and connectivity. Refer to the
following exhibits and perform any necessary changes to the wireless and wired infrastructure by adjusting devices. Note: Adjust the LEAST number of devices
needed to fix the issue.
Select and Place:

DRAG DROP
A customer’s email server is not sending emails. Arrange the troubleshooting steps in the order the technician should perform them:
Select and Place:

DRAG DROP

Drag and drop the fiber cable connection types to the appropriate image.
Select and Place:

DRAG DROP
Build a T-658A Connection

Select and Place: