Cisco WiSM controllers have multiple interface types. Which three statements about the interface
types of the controllers are true? (Choose three.)
A.
The service-port interface is the default interface for in-band management of the controller.
B.
If the service port is in use, then the management interface must be on a different subnet than
the service port.
C.
You cannot ping the AP-manager interface.
D.
The virtual gateway interface is used to support mobility management.
E.
The management interface is used as the source IP address for all Layer 3 communications
between the controller and the lightweight APs.
F.
On the Cisco WiSM, the management interface is used to synchronize the supervisor engine
and the Cisco WiSM.
There are multiple types of interfaces on each controller of the Cisco WiSM; three of them are pre-defined types that must be present and configured at setup time:
Management interface (pre-defined and mandatory)
AP-manager interface (pre-defined and mandatory)
Virtual interface (pre-defined and mandatory)
Operator-defined interface (user-defined)
Service-port interface (pre-defined and mandatory)
Notes:
– You cannot ping the AP-Manager interface.
– The virtual gateway interface is used to support mobility management,
– If the service port is in use, the management interface must be on a different subnet than the service port.
0
0