Passive monitoring metrics include the following:
• Delay: Cisco PfR measures the average delay of TCP flows for a given prefix or traffic class. Delay is the measurement of the round-trip response time (RTT) between the transmission of a TCP synchronization message and receipt of the TCP acknowledgement.
• Packet loss: Cisco PfR measures packet loss by tracking TCP sequence numbers for each TCP flow; it tracks the highest TCP sequence number. If it receives a subsequent packet with a lower sequence number, PfR increments the packet-loss counter. Packet loss is measured in packets per million.
• Reachability: Cisco PfR measures reachability by tracking TCP synchronization messages that have been sent repeatedly without receiving a TCP acknowledgement.
• Throughput: Cisco PfR measures throughput by measuring the total number of bytes and packets for each interesting traffic class or prefix for a given interval of time.
0
0
foosays:
but QoS is also one of the parameters by the mean opinion Score, this is correct answer too
0
0
Blazej Kwiatkowskisays:
And, you can download that new 150Q 400-101 dumps here:
CDE
http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/performance-routing-pfr/product_data_sheet0900aecd806c4ee4.html
Passive monitoring metrics include the following:
• Delay: Cisco PfR measures the average delay of TCP flows for a given prefix or traffic class. Delay is the measurement of the round-trip response time (RTT) between the transmission of a TCP synchronization message and receipt of the TCP acknowledgement.
• Packet loss: Cisco PfR measures packet loss by tracking TCP sequence numbers for each TCP flow; it tracks the highest TCP sequence number. If it receives a subsequent packet with a lower sequence number, PfR increments the packet-loss counter. Packet loss is measured in packets per million.
• Reachability: Cisco PfR measures reachability by tracking TCP synchronization messages that have been sent repeatedly without receiving a TCP acknowledgement.
• Throughput: Cisco PfR measures throughput by measuring the total number of bytes and packets for each interesting traffic class or prefix for a given interval of time.
0
0
but QoS is also one of the parameters by the mean opinion Score, this is correct answer too
0
0
And, you can download that new 150Q 400-101 dumps here:
https://drive.google.com/open?id=0B-ob6L_QjGLpfnRCUEFYcEhWZUw3OGNQY2FUSkptUXBrZDVzeE8zdkJQUERtOUFINDBFQW8
Best Regards!
0
0
BTW, part of new CCIE R&S 400-101 exam questions from that 328Q dumps for your reference:
https://drive.google.com/open?id=0B-ob6L_QjGLpfnRCUEFYcEhWZUw3OGNQY2FUSkptUXBrZDVzeE8zdkJQUERtOUFINDBFQW8
Regards!
0
0
Besides, part of new 400-251 dumps are available here:
http://www.ciscobraindump.com/?s=400-251
Best Regards!
0
0
Besides, part of new 400-351 dumps are available here:
http://www.ciscobraindump.com/?s=400-351
Best Regards!
0
0
More, part of CCIE new 708Q 400-101 dumps are available here:
https://drive.google.com/open?id=0B-ob6L_QjGLpfnRCUEFYcEhWZUw3OGNQY2FUSkptUXBrZDVzeE8zdkJQUERtOUFINDBFQW8
Best Regards!
0
0
By the way, part of the new 742Q 400-101 dumps are available here:
https://drive.google.com/open?id=0B-ob6L_QjGLpfnRCUEFYcEhWZUw3OGNQY2FUSkptUXBrZDVzeE8zdkJQUERtOUFINDBFQW8
Best Regards!
0
0