Which of the following commands will set the boot slot to the factory slot? (Choose two.)
A.
utils system factory init
B.
utils system factory reset
C.
utils system restart
D.
utils system switch-version
E.
utils system switch-version factory
Explanation:
The utils system factory reset command and the utils system switch-version factory command will set the boot
slot to the factory slot. The utils system factory reset command will set the Cisco TelePresence System 500 to
the factory default settings as well as set the boot slot to the factory slot. After issuing the command, you will beprompted for confirmation, after which the system will be reset and restarted.
The utils system factory init command will set the Cisco TelePresence System 500 to the factory initialized
configuration. However, the system will remain in its current boot slot. After issuing the command, you will be
prompted for confirmation, after which the system will be initialized and restarted.
The utils system switch-version command configures the system to use a different boot slot. The syntax of the
utils system switchversion command is utils system switch-version [force | factory [1 | 2]]. If none of the optional
keywords are used, the system will toggle between slot 1 and slot 2. After issuing the command, you will be
prompted for confirmation. Afterward, if the system is currently in a call, the system will restart when the call
ends. However, you can use the optional force keyword to cause the system to restart immediately.
The utils system restart command will restart the Cisco TelePresence System 500. By default, if the system is
currently in a call, the system will restart when the call ends. However, you can use the optional force keyword
to cause the system to restart immediately.Cisco: Command-Line Interface Reference Guide for Cisco TelePresence Immersive Systems: Utils
Commands: utils system factory reset
Cisco: Command-Line Interface Reference Guide for Cisco TelePresence Immersive Systems: Utils
Commands: utils system switch-version
New 210-065 Exam Questions and Answers Updated Recently (9/Jan/2018):
NEW QUESTION 347
Which effect of the CLI set audio aec enable command on the immersive Cisco Telepresence system is true?
A. Echo cancellation is enabled.
B. Call economy quality feature is enabled.
C. Noise cancellation is enabled.
D. AEC audio codec is enabled.
Answer: A
NEW QUESTION 348
What is the process for resetting a Cisco VCS control appliance back to initial default configuration?
A. Push down and hold the reset button on the back of the VCS appliance for 10 seconds and power cycle the device.
B. Log onto the CLI console as root and initiate the defaults-reset command.
C. Log into the GUI interface as administrator, choose System Settings, select Restore, select Factory Reset.
D. Log onto the CLI console as root and initiate the factory-reset command.
Answer: D
NEW QUESTION 349
Which two Cisco TelePresence endpoints support hosting embedded multisite conferences? (Choose two.)
A. SX20
B. MX800
C. DX70
D. DX80
E. Jabber Video for Cisco TelePresence
Answer: AB
NEW QUESTION 350
Which option is the Cisco recommended layout if cascading is being used?
A. Enhanced Continuous Presence
B. Full Participant
C. Continuous Presence
D. Active Speaker
Answer: C
NEW QUESTION 351
A Cisco EX60 is connected to the network, but users cannot make calls and the device is unregistered. The voice engineer configured the device on Cisco Unified Communications Manager. Which two options are causes of this problem? (Choose two.)
A. SIP URI is not configured correctly.
B. H.323 parameters are not configured correctly.
C. IP address is in a different subnet.
D. No user is associated to a device.
E. SIP proxy is not configured correctly.
Answer: DE
NEW QUESTION 352
Which desktop endpoint support 802.3af PoE?
A. DX70
B. DX80
C. DX90
D. DX650
Answer: D
NEW QUESTION 353
An engineer is backing up a VCS configuration. Which two methods can be used? (Choose two.)
A. FTP
B. SFTP
C. SSH
D. Web administration
E. Local
Answer: BC
1
0
NEW QUESTION 354
An engineer sees a video camera icon on the Cisco IP phone screen status line. Which meaning of this icon is true?
A. The Cisco VT camera is connected to the PC, and the PC is connected to the Cisco IP phone.
B. The Cisco IP phone has web access.
C. The Cisco IP phone is receiving a video call.
D. The Cisco IP phone is configured with video capabilities.
Answer: D
NEW QUESTION 355
When an administrator schedules a conference, which three devices are part of the process? (Choose three.)
A. Endpoint
B. Cisco Prime Collaboration Manager
C. Cisco TelePresence Management Suite
D. Cisco Communications Manager
E. MCU appliance
F. Cisco TelePresence Content Server
Answer: BDF
NEW QUESTION 356
Which option is an immersive endpoint?
A. Cisco TelePresence EX90
B. Cisco TelePresence TX9000
C. Cisco TelePresence SX10
D. Cisco TelePresence DX70
Answer: C
0
0
What’s more, part of the new 363Q 210-065 dumps are available here:
https://drive.google.com/open?id=0B-ob6L_QjGLpfjREa25iSExKUkxvQi12aVdDMWNJSGs0T2JwYkhVUmtwdXhETmZVR3ZNek0
Best Regards!
0
0