In Cisco IOS-XR, the maximum-prefix command, to control the number of prefixes that can be
installed from a BGP neighbor, is configured under which configuration mode?
A.
RP/0/RSP0/CPU0:P2(config-bgp)#
B.
RP/0/RSP0/CPU0:P2(config-bgp-af)#
C.
RP/0/RSP0/CPU0:P2(config-bgp-nbr)#
D.
RP/0/RSP0/CPU0:P2(config-bgp-nbr-af)#
IOS/XE:
router bgp 1
neighbor 1.1.1.1 remote-as 2
neighbor 1.1.1.1 maximum-prefix 10 70 restart 5
neighbor 2001:db8:128::130 remote-as 3
address famiily ipv6 unicast
neighbor 2001:db8:128::130 activate
neighbor 2001:db8:128::130 maximum-prefix 10 70 restart 5
XR:
router bgp 1
address-family ipv4 unicast
address-family ipv6 unicast
neighbor 1.1.1.1
remote-as 2
address-family ipv4 unicast
maximum-prefix 100000 80 restart 5
neighbor 2001:db8:132::134
remote-as 3
address-family ipv6 unicast
maximum-prefix 10000 80 restart 5
0
0
maximum-prefix 10, warn at 70% of 10 routes (7), restart BGP peering after 5 minutes
maximum-prefix 100000, warn at 80% of 100,000 routes (80,000), restart BGP peering after 5 minutes
0
0