Which command path correctly describes how to access and troubleshoot clients with Cisco WCS version 7.0?
A.
Tools > Clients > select displayed client’s MAC address
B.
Tools > Clients > enter client’s MAC address
C.
Monitor > Clients > click displayed client’s MAC address
D.
Monitor > Clients > enter client’s MAC address
Explanation:
Answer is C or D ?? I think D is right, needs to enter clients MAC, as mentioned in lammle Study Guide
0
0
the correct answer is D
0
0
mmm i´m confused, look http://www.cisco.com/en/US/docs/wireless/wcs/7.0MR1/configuration/guide/clientmgmt.html#wp1185909 the Figure 10-14, then tells you to Click the icon to the right of the Client MAC Address that you want to troubleshoot. The Troubleshooting Client page appears (see Figure 10-15). If you are troubleshooting a Cisco Compatible Extension v5 client, your Troubleshooting Client page has additional tabs like the page referenced in Figure 10-19.
0
0
I think C is correct – the selection is pertaining to the Monitor tab – the only option is you will look for the MAC address.
To enter the MAC address in the Client Troubleshooting – it is on the WCS Home – Client Tab. This is not in the selection.
0
0
Thank you John,
I found what you said is correct. D is not from Monitor.
Still I wonder if we can ‘click’ mac address…
#Reference
Cisco Wireless Control System Configuration Guide, Release 7.0
http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0clientmgmt.html#wpxref19379
0
0
Sorry, I should have noticed Cisco says D is possible from Monitor.
Anyway this is not a good question.
I should stop speaking about this question…
#(same source)
Step 1 Choose Monitor > Clients.
Step 2 In the Quick Search area, type the MAC address of the client and click Search. The Search Results page appears (see Figure 11-13).
Step 3 Click View List to see the clients that matched the search criteria in the Clients page. The Monitor > Clients page appears (see Figure 11-14).
0
0
Correct answer is C, this is a change from the 721 exam to 722…Or actually its change from WCS 5.* to WCS 7.*…
Watch out for 1st edition technical books…too many errors and confusions to be good material for a exam…
0
0
the answer is D.Because In WCS to troubleshoot client.The path is monitor—client and have to enter the Client MAc address
0
0
Answer should be C, because if you had to enter the client’s mac address you do not have to follow the process “monitor >> Client”. Instead you can just use the the quick search. all the answers are following the process “Monitor >> Clients ” etc.. so you can guess it should C.
0
0