Refer to the exhibit. You have configured transcoder resources in both an IOS router and a Cisco
Unified Communications Manager. When you review the configurations in both devices the IP
addresses and transcoder names are correct, but the transcoder is failing to register with the Cisco
Unified Communications Manager. Which command needs to be edited to allow the transcoder to
register properly?

A.
The associate profile and dsp farm profile numbers need to match associate ccm 2 command.

B.
The associate ccm 2 priority 1 command needs to be changed so the ccm value matches identifier
1 in the sccp ccm 10.1.1.1 command.

C.
The sccp ccm group number needs to match the associate ccm 2 command.

D.
The maximum sessions command must match the number of codecs configured under the dsp
farm profile.

E.
The sccp ccm group number must match the voice-card number.

Explanation:
The value of the IP address should match the IP address in the ip source-address command
Link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmevtrns.ht
ml