Your supervisor calls you and tells you that one of the Stratix 5700 switches is not
assigning all CIP explicit messages to the proper QoS queue. The switch was deployed
with the ab-global macro and CIP explicit messages were previously being assigned to the
proper QoS queue.
You suspect the access-lists associated with the ab-global macro have
been changed. Look at the following access list from the switch configuration:
access-list 101 permit udp any eq 2222 any dscp 55
access-list 102 permit udp any eq 2222 any dscp 47
access-list 103 permit udp any eq 2222 any dscp 43
access-list 104 permit udp any eq 2222 any
access-list 105 permit udp any eq 44818 any
access-list 105 permit tcp any eq 44816 any

What needs to be done to fix the above access list?

A.
Access list 105 should reference udp port 44816

B.
Access lists 101-104 should reference udp port 2212

C.
Access list 105 should reference tcp port 44818

D.
Access list 104 should be a deny access list rather than a permit access list