What is the default CX Management 0/0 IP address on a Cisco ASA 5512-X appliance?
A.
192.168.1.1
B.
192.168.1.2
C.
192.168.1.3
D.
192.168.1.4
E.
192.168.1.5
F.
192.168.8.8
Explanation:
Get 50% Discount on All Your Purchases
at PrepAway.com - Latest Exam Questions
This is ONE TIME OFFER
50%
This answer is not correct. The 192.168.8.8 is for the ASA 5585-X and for the 5512-X through 5555-X it is 192.168.1.2
0
0
ASA CX Management 0/0 interface using SSH—You can connect to the default IP address (192.168.1.2), or you can use ASDM to change the management IP address and then connect using SSH. These models run the ASA CX module as a software module. The ASA CX management interface shares the Management 0/0 interface with the ASA. Separate MAC addresses and IP addresses are supported for the ASA and ASA CX module. You must perform configuration of the ASA CX IP address within the ASA CX operating system (using the CLI or ASDM). However, physical characteristics (such as enabling the interface) are configured on the ASA. You can remove the ASA interface configuration (specifically the interface name) to dedicate this interface as an ASA CX-only interface. This interface is management-only.
0
0
Hello i found that in Cisco website
ASA 5585-X
The ASA CX hardware module includes a separate Management 1/0 interface with the default IP address 192.168.8.8:
For details about how to connect the ASA CX management interface in your network, see the ASA 5585-X quick start guide.
ASA 5500-X
These models run the ASA CX module as a software module, and the ASA CX management interface shares the Management 0/0 interface with the ASA. The module default address is 192.168.1.2.
So in the question, it deals with interface 0/0 so i effectively i think the answer is 192.168.1.2
0
0
The management IP is 192.168.1.2
Per Cisco:
http://www.cisco.com/c/en/us/td/docs/security/asa/quick_start/5500X/5500x_quick_start.html
0
0
http://www.cisco.com/c/en/us/td/docs/security/asa/asa91/configuration/firewall/asa_91_firewall_config/modules_cx.pdf
To access the CLI, you can use the following methods:
• ASA 5585-X:
– ASA CX Management 1/0 interface using SSH—You can connect to the default IP address
(192.168.8.8), or you can use ASDM to change the management IP address and then connect
using SSH. The ASA CX management interface is a separate external Gigabit Ethernet
interface.
.
• ASA 5512-X through ASA 5555-X:
– ASA CX Management 0/0 interface using SSH—You can connect to the default IP address
(192.168.1.2), or you can use ASDM to change the management IP address and then connect
using SSH. These models run the ASA CX module as a software module.
0
0
The answer is wrong! The correct answer is B.
http://www.cisco.com/c/en/us/td/docs/security/asa/asa91/configuration/firewall/asa_91_firewall_config/modules_cx.html
0
0