Which three statements are true?
Refer to the exhibit. Which three statements are true? (Choose three.) Select 3 response(s).
Why is the 140.140.0.0 network not used as the gateway of last resort even though it is configured first?
R3#show run | include default-
ip default-network 140.140.0.0
ip default-network 130.130.0.0
R3#show ip route | begin Gateway
Gateway of last resort is 0.0.0.0 to network 130.130.0.0
116.0.0.0/8 is variably subnetted, 5 subnets, 3 masks
C 116.16.37.0/30 is directly connected, Serial1/0.2
C 116.16.32.0/30 is directly connected, Serial2/0.2
C 116.16.34.0/28 is directly connected, Serial1/0.1
C 116.16.35.0/28 is directly connected, Serial2/0.1
S 116.0.0.0/8 [1/0] via 116.16.34.0
* 140.140.0.0/32 is subnetted, 3 subnets
O 140.140.1.1 [110/65] via 116.16.34.4, 00:14:54, Serial1/0.1
O 140.140.3.1 [110/65] via 116.16.34.4, 00:14:54, Serial1/0.1
O 140.140.2.1 [110/65] via 116.16.34.4, 00:14:54, Serial1/0.1
* 130.130.0.0/16 is variably subnetted, 4 subnets, 2 masks
D* 130.130.0.0/16 is a summary, 00:30:04, Null0
C 130.130.1.0/24 is directly connected, Ethernet0/0
C 130.130.2.0/24 is directly connected, Ethernet0/1
C 130.130.3.0/24 is directly connected, Ethernet1/0
D 150.150.0.0/16 [90/679936] via 116.16.35.5, 00:02:58, Serial2/0.1
Refer to the exhibit. Why is the 140.140.0.0 network not used as the gateway of last resort even though it is configured first?
Select the best response.
Which configuration change should be made to resolve this issue?
Refer to the exhibit. When you examine the routing table of R1 and R4, you are not able to see the R1 Ethernet subnet on the R4 routing table. You are also not able to see the R4 Ethernet subnet on the R1 routing table.
Which configuration change should be made to resolve this issue? Select the routers where the configuration change will be required, and select the required EIGRP configuration command(s). Choose two answers. (Choose two.)
Select 2 response(s).
Which route should be the only one removed from the routing tables of the routers?
The company and the company network have both been growing rapidly. Multiple adds, moves and changes have been applied to the network. Your boss has asked you to troubleshoot a recent OSPF synchronization problem that has arisen. There have been synchronization problems at separate locations in the OSPF area 0. There have been reported link failures during the rapid growth of the company network. You are required to resolve the OSPF problem. OSPF must be able to converge when the network changes.
The log of d1 reports the following:
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down
%LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to down
%OSPF-5-ADJCHG: Process 1, Nbr 8.187.175.82/32 on FasstEthernet0/1 from FULL to DOWN,
Neighbor Down: Interface down or detached
This event was anticipated due to maintenance; however, it resulted in excessive lost routes. Which route should be the only one removed from the routing tables of the routers?
Which two things should you verify to troubleshoot this problem?
You have implemented mutual route redistribution between OSPF and EIGRP on a border router. When checking the routing table on one of the OSPF routers within the OSPF routing domain, you are seeing some, but not all of the expected routes. Which two things should you verify to troubleshoot this problem? (Choose two.) Select 2 response(s).
What should you verify to troubleshoot this problem?
You have implemented mutual route redistribution between OSPF and EIGRP on a border router. When checking the routing table on one of the EIGRP routers within the EIGRP routing domain, you are seeing some, but not all of the expected routes. What should you verify to troubleshoot this problem? Select the best response.