An engineer is conducting a survey for a point-to-point link with a 30 dBm transmitter and 6 dBi
antenna over 2.4 GHz. If the engineer reduces the transmitter power to 28 dBm, what is the
maximum antenna gain that can be used?

Refer to the exhibit.

A company requires a multi-point bridge solution with Cisco 1400 series bridges.
The central bridge (B1) is set to 10 dBm, the manufacturing remote bridge (B2) is set to
20 dBm, the inventory remote bridge (B3) is set to 20 dBm, and the shop remote bridge (B4) is set
to 10 dBm. What is the maximum allowed power setting for all four bridges?

The customer site requires Cisco 1400 bridges with 28dBi external antennas in a PTP design.
What is the maximum power setting allowed by Cisco?

An engineer is conducting a VoWLAN survey for voice clients with a max power of 40 mW. What
power level should the engineer set the AP to during the survey?

A network engineer acquired a floor plan of a building, temporarily mounted an 1132 AP,
associated a wireless NIC to the AP, and began documenting packet exchanges between the AP
and the wireless NIC while walking throughout the facility. What best describes what the engineer
was doing?

A company has requested an indoor wireless survey in a multi-tenant building for 2.4GHz data and
5GHz voice services. Data clients will require three spatial streams and 4×4 MIMO technology.
What is the Cisco recommended Access Point for performing this survey?

What two types of antennas have a high gain, narrow beam width, and are typically used for pointto-point bridging? (Choose two.)

An engineer wants to provide coverage between warehouse shelving stocked with bulk metal
materials. What antenna would be adequate for performing this survey?

A company needs to link two buildings, separated by 100 feet of parking lot, with Cisco 1300
bridges. Which three Cisco recommended antennas should be used? (Choose three.)

Refer to the exhibit.

Which type of interference would the engineer detect on the Cisco Spectrum Expert?